Article ID: 332001
Article Last Modified on 2/21/2007
APPLIES TO
- Microsoft Windows 2000 Server
- Microsoft Windows 2000 Advanced Server
- Microsoft Windows 2000 Professional Edition
This article was previously published under Q332001
IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 Description of the Microsoft Windows Registry
SYMPTOMS
In Windows 2000, when you set the SynAttackProtect value in the following registry key to 2, the "don't fragment" or DF bit is incorrectly set to 0 on all packets that are sent from the computer:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
CAUSE
This problem occurs because the DF bit option is not initiated correctly when the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\SynAttackProtect value is set to 2.
RESOLUTION
Service Pack Information
To resolve this problem, obtain the latest service pack for Microsoft Windows 2000. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
260910 How to Obtain the Latest Windows 2000 Service Pack
Hotfix Information
A supported fix is now available from Microsoft, but it is only intended to correct the problem that is described in this article. Apply it only to computers that are experiencing this specific problem. This fix may receive additional testing. Therefore, if you are not severely affected by this problem, Microsoft recommends that you wait for the next Windows 2000 service pack that contains this hotfix.
To resolve this problem immediately, contact Microsoft Product Support Services to obtain the fix. For a complete list of Microsoft Product Support Services phone numbers and information about support costs, visit the following Microsoft Web site:
NOTE: In special cases, charges that are ordinarily incurred for support calls may be canceled if a Microsoft Support Professional determines that a specific update will resolve your problem. The typical support costs will apply to additional support questions and issues that do not qualify for the specific update in question.
The Global version of this fix has the file attributes (or later) that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.
Date Time Version Size File name ----------------------------------------------------------- 13-Nov-2002 16:36 5.0.2195.6127 118,896 Afd.sys 22-Nov-2002 22:29 5.0.2195.6020 105,232 Msafd.dll 22-Nov-2002 22:28 5.0.2195.6139 313,648 Tcpip.sys 31-Jul-2001 00:15 5.0.2195.3988 16,240 Tdi.sys 22-Nov-2002 22:29 5.0.2195.4874 17,680 Wshtcpip.dll
STATUS
Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article. This problem was first corrected in Microsoft Windows 2000 Service Pack 4.
WORKAROUND
WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk. To work around this problem, set the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcip\Parameters\SynAttackProtect value to either 0 (zero) or 1:
- Click Start, and then click Run.
- In the Open box, type regedit, and then click OK.
- Locate, and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcip\Parameters - In the right pane, double-click
SynAttackProtect. - In the Value data box, type either 0 or 1, and then click OK.
- Quit Registry Editor.
MORE INFORMATION
The SynAttackProtect registry value is used to harden the TCP/IP stack against denial of service attacks. You configure this value according to the level of protection that you want to set. For additional information about TCP/IP-related registry values that you can configure to harden the TCP/IP stack on computers that are directly connected to the Internet, click the following article number to view the article in the Microsoft Knowledge Base:
315669 HOW TO: Harden the TCP/IP Stack Against Denial of Service Attacks in Windows 2000
Keywords: kbhotfixserver kbqfe kbnetwork kbwin2ksp4fix kbprb kbbug kbfix kbwin2000presp4fix KB332001
