Article ID: 290620
Article Last Modified on 6/23/2005
APPLIES TO
- Microsoft Internet Information Server 4.0
- Microsoft Internet Information Services 5.0
This article was previously published under Q290620
We strongly recommend that all users upgrade to Microsoft Internet Information Services (IIS) version 6.0 running on Microsoft Windows Server 2003. IIS 6.0 significantly increases Web infrastructure security. For more information about IIS security-related topics, visit the following Microsoft Web site:
SUMMARY
One of the ways to troubleshoot a memory leak is to get a dump heap (DH) log or user-mode dump heap (UMDH) logs. Although you can usually get the logs manually, in some cases you may need to automate the process.
In most cases, the memory increases at a relatively slow rate (for example, it occurs over five hours), so the system administrator has time to manually get the logs approximately every 30 minutes. However, sometimes the memory leak occurs suddenly, and the system may lose all of its memory in five minutes. In this case, it is useful to automate the DH log generation process.
MORE INFORMATION
Steps to Set Up an Alert to Automatically Generate a DH Log
The following steps are based on a computer that is running Microsoft Windows 2000. Although you can set up an alert to automatically generate a DH log on a Microsoft Windows NT 4.0-based computer, the user interface may vary.
- Make sure that you have a memory leak. A memory leak is usually indicated when the Private Bytes counter grows to a large value. (In Internet Information Server, this usually means 150 megabytes or greater.) Also, the Working Set counter no longer runs side-by-side with the Private Bytes counter.
- Follow the instructions in 253706 "How To Isolate and Identify the Source of Inetinfo or Other Process Memory Leaks" to manually generate the DH files. Make sure that the DH works properly.
Note You do not need a checked build of Ntdll.dll if you have Windows NT 4.0 SP4 or later. Create a Microsoft Visual Basic Scripting Edition (VBScript) file named Vbsdh.vbs that generates a DH log file and gives it a name that is related to Time. For example, see the following sample code:
Note You must modify the path for DH, the process number that you want to create the DH log for, and the output directory.Dim objShell dim args dim time set objShell = CreateObject("WScript.Shell") ' Time looks like: 11/12/2000 6:41:20 PM 'Get the time time = Now 'Remove the "/", and ":" characters and the spaces from the file name so 'that the file name is valid. time = Replace(time, "/", "_", 1, 1) time = Replace(time, "/", "_", 1, 1) time = Replace(time, ":", "_", 1, 1) time = Replace(time, ":", "_", 1, 1) time = Replace(time, " ", "_", 1, 1) time = Replace(time, " ", "_", 1, 1) 'Add the .txt extension time = time & ".txt" 'Change the path of DH """c:\dh.exe""", the process number of the DLL host that 'you want to DH """2564""", and the path for the output file """c:\OutputDir\""". args = "c:\dh.exe -p 2564 -f c:\OutputDir\" & time objShell.Run "%comspec% /c " & args- At a command prompt, type the following command to make sure that the correct file name with the correct output is generated:
c:\winnt\system32\cscript.exe vbsdh.vbs
- Create an alert that calls the VBScript file when the Private Bytes counter grows larger than a certain value. To do this, follow these steps:
- On the Start menu, point to Programs, point to Administrative Tools, and then click Performance.
- Click to expand Performance Logs and Alerts, and then click Alerts.
- On the Action menu, click New Alert Settings, and type an alert name.
- On the General tab, click Add.
- In the Select Counters dialog box, in the Performance object list, click Process. Click Select counters from list, and then click Private Bytes. Click Select instances from list, and then click Inetinfo. Click Add, and then click Close.
- In the Alert when the value is box, click Over. In the Limit box, type a large value such as 150000000 (or 150 megabytes).
- In the Interval spin box, set the interval to 10 seconds (or however long you prefer, depending on how fast the memory grows).
- On the Action tab, select the Run this program check box, and type the following text in the text box:
c:\winnt\system32\cscript.exe
- Click Command Line Arguments, select the Text message check box, and type the file path to the VBScript file that you created (for example, C:\Vbsdh.vbs). Click OK.
- Click Apply, and then click OK.
- To start the alert, click the Start button on the Perfmon toolbar.
The alert generates one log file every 10 seconds when the memory is over the limit that you set in step 5f.
To test if the alert is working, you can set the limit to a very low value (for example, 200). Start the alert, and let it run for 40 seconds. After you confirm that the alert works, you can reset the value to a higher limit.
Note In some scenarios, the automatically generated DH log may work for a number of times until the system grows very low on resources; then, the DH starts to return the c0000017 error. When this occurs, stop the alert.
Also, the alert logs an event in the event log. This event is useful because it lists the value of the counter at the time of the memory leak. You can use this information to determine exactly how much the memory grows during the specific time interval that you set.
You can also use this technique to troubleshoot any user-mode application that is running on a Windows NT-based or Windows 2000-based computer.
Keywords: kbhowto KB290620
