Article ID: 270036
Article Last Modified on 10/27/2006
APPLIES TO
- Microsoft Systems Management Server 2.0 Standard Edition
This article was previously published under Q270036
SYMPTOMS
When multiple Transmission Control Protocol/Internet Protocol (TCP/IP) addresses are bound to one network adapter, the discovery data collected from the client only reports one of the TCP/IP addresses.
When viewing the client properties in the Systems Management Server Administrator console the Client or AgentSite attributes will not show the expected data. The Client property may be set to 0 (not installed) when it should be set to 1 (installed), and AgentSite property may be blank. Additionally, only the first TCP/IP address of the client is listed. If the first TCP/IP address is 0.0.0.0 there will be no TCP/IP address listed.
CAUSE
The Systems Management Server discovery process only captures one TCP/IP address per network adapter.
RESOLUTION
To resolve this problem, obtain the latest service pack for Systems Management Server version 2.0. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
236325 How to Obtain the Latest Systems Management Server 2.0 Service Pack
WORKAROUND
Make sure that the client's TCP/IP address that is within the Systems Management Server site boundaries is the first address bound to the client's network adapter. This address is listed first when you look at the Ipconfig, or Winipcfg command-line tools on the client.
STATUS
Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article. This problem was first corrected in Systems Management Server 2.0 Service Pack 4.
MORE INFORMATION
This limitation of reporting only one TCP/IP per network adapter applies to all forms of discovery with the exception of Network Discovery using SNMP.
Hotfix Installation Instructions
Since this is a hotfix to the SMS Client base components, it should be applied to all primary and secondary sites in the SMS hierarchy. To install the fix, use the appropriate method.
Method 1: Using the Hotfix Installer
NOTE: You can use this method only for I386-based computers.
- Copy the hotfix folder structure to a share on your network. Q270036.exe is a Microsoft SMS Installer file that updates specific files on your site server.
- Log on to your site server using an account with administrative privileges.
- On the site server, close the SMS Administrator console.
- Run Q270036.exe and follow the directions in the wizard. You can run the file in Quiet mode using the /s switch.
Method 2: Manual Installation
NOTE: The post SP3 version of the hotfix does not include Abnwcli.dll and Falclin.dll as these files are included with SMS 2.0 Service Pack 3. Also, some of the files listed above are contained within CCMCore.exe and Clicore.exe. Those files are handled automatically and do not need to be manually copied.
- Create a folder in a location that is accessible to your SMS site servers.
- Copy the platform folders that contain the hotfixed files to the new folder.
- From each of the primary and secondary SMS site servers in your environment, log on to your site server by using an account with administrative privileges.
- Quit the SMS Administrator console if it is running.
- Stop all SMS services.
- Replace the Abnwcli.dll file in the Sms_root_folder\Bin\Platform folder with the version obtained from the hotfix.
- Replace the BindCliN.dll file in the Sms_root_folder\Bin\Platform folder with the version obtained from the hotfix.
- Replace the Falclin.dll file in the Sms_root_folder\Bin\Platform folder with the version obtained from the hotfix.
- Replace the Mslmclin.dll file in the Sms_root_folder\Bin\Platform folder with the version obtained from the hotfix.
- Replace the NdsCliN.dll file in the Sms_root_folder\Bin\Platform folder with the version obtained from the hotfix.
- Replace the Ntsvrdis.dll file in the Sms_root_folder\Bin\Platform folder with the version obtained from the hotfix.
- Replace the Clicore.exe file in the Sms_root_folder\Inboxes\Clicomp.src\Base\Platform folder with the version obtained from the hotfix.
- Replace the Compver.ini file in the Sms_root_folder\Inboxes\Clicomp.src\Base folder with the Compverbase.ini file obtained from the hotfix. Note that you must rename the Compverbase.ini file to Compver.ini.
- Restart all SMS services.
NOTE: An NT_Logon_Server_Manager (LSM) polling cycle is necessary to cause the hotfixed Clicore.exe file to be propagated to all the logon points so that new clients will be installed by using the hotfixed files. In Systems Management Server (SMS) 2.0 Service Pack 2 (SP2), LSM was changed so that it does not perform a polling cycle when the SMS Executive service is stopped and restarted. For additional information, click the article number below to view the article in the Microsoft Knowledge Base: Q249333 SMS: Logon Server Manager Performs a Full Work Cycle on Each SMS Executive Restart.
- Force the Logon Server Manager to perform a polling cycle by creating a file named NT_LOGON.NOT in the following folder: Sms_root_folder\Inboxes\NT_Logon.box\Notify
All logon points must be updated before you attempt to install new clients.
Additional query words: prodsms
Keywords: kbhotfixserver kbqfe kbbug kbfix kbqfe kbsms200presp4fix KB270036
