Article ID: 254231
Article Last Modified on 3/1/2007
APPLIES TO
- Microsoft Windows Server 2003, Standard Edition (32-bit x86)
- Microsoft Windows XP Professional
- Microsoft Windows 2000 Server
- Microsoft Windows 2000 Advanced Server
- Microsoft Windows 2000 Professional Edition
This article was previously published under Q254231
SUMMARY
The default behavior of the remote access client in clients that are running Windows 2000, Microsoft Windows XP, or Microsoft Windows Server 2003, is different from earlier versions of Windows. Earlier versions of Windows add a default subnet route to the remote access client when they connect to a remote access server. This route is "classful," meaning that it assumes a network mask based on the address received.
MORE INFORMATION
This route table example is from a Microsoft Windows 98 Dial-Up Networking client:
Active Routes: Network Address Netmask Gateway Address Interface Metric 0.0.0.0 0.0.0.0 123.15.0.130 123.15.0.130 1 123.0.0.0 255.0.0.0 123.15.0.130 123.15.0.130 1 123.15.0.130 255.255.255.255 127.0.0.1 127.0.0.1 1 123.255.255.255 255.255.255.255 123.15.0.130 123.15.0.130 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 224.0.0.0 224.0.0.0 123.15.0.130 123.15.0.130 1 255.255.255.255 255.255.255.255 123.15.0.130 123.15.0.130 1
Windows 2000, Windows XP, and Windows Server 2003 do not create the subnet route. The routes added to the client after connecting by using remote access are: a HOST route to the address of the remote access server, a HOST route to the address received, and a default gateway route.
The next two sample route tables are from a Windows 2000-based remote access client:
=========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x7000002 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 123.15.0.130 123.15.0.130 1 123.15.0.129 255.255.255.255 123.15.0.130 123.15.0.130 1 123.15.0.130 255.255.255.255 127.0.0.1 127.0.0.1 1 123.255.255.255 255.255.255.255 123.15.0.130 123.15.0.130 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 224.0.0.0 224.0.0.0 123.15.0.130 123.15.0.130 1 Default Gateway: 123.15.0.130 =========================================================================== Persistent Routes: None
If you disable the Use default gateway on remote network option in the dial-up connection's properties, a network route is added as before.
=========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x9000002 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 123.0.0.0 255.0.0.0 123.15.0.130 123.15.0.130 1 123.15.0.129 255.255.255.255 123.15.0.130 123.15.0.130 1 123.15.0.130 255.255.255.255 127.0.0.1 127.0.0.1 1 123.255.255.255 255.255.255.255 123.15.0.130 123.15.0.130 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 224.0.0.0 224.0.0.0 123.15.0.130 123.15.0.130 1 =========================================================================== Persistent Routes: None
In earlier versions of Windows, you can add routes using the remote access server's remote access address as the next hop. Windows 2000, Windows XP, and Windows Server 2003 do not support this function. To add static routes to a Windows 2000-based remote access connection, you must configure them to use the address received as the next hop.
In all of the examples in this article, the remote access server address pool begins at 123.15.0.129. The first address from the pool is used by the remote access server itself.
Additional query words: ras route static
Keywords: kbinfo KB254231