Article ID: 251746
Article Last Modified on 10/25/2007
APPLIES TO
- Microsoft Exchange Server 2003 Enterprise Edition
- Microsoft Exchange Server 2003 Standard Edition
- Microsoft Exchange 2000 Server Standard Edition
- Microsoft Exchange 2000 Enterprise Server
This article was previously published under Q251746
Important This article contains information about how to modify the registry. Make sure that you back up the registry before you modify it. Make sure that you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 How to back up and restore the registry in Windows XP and Windows Vista
SUMMARY
This article describes how to troubleshoot messages that remain in the "Messages awaiting directory lookup" queue in Exchange Server 2003 and in Exchange 2000 Server. This article describes the following troubleshooting methods:
- Verify that the global catalog server is available.
- Verify that the Exchange servers have sufficient permissions.
- Verify that the attributes of user object are correct.
- Verify that the message archive location is valid if message archiving is enabled.
- Verify that the mailbox store on the SMTP bridgehead server is mounted.
- Verify whether this issue occurs when you send messages to a large distribution list.
- Verify whether any third-party software is installed on the Exchange server.
INTRODUCTION
This article describes how to troubleshoot messages that remain in the "Messages awaiting directory lookup" queue in Microsoft Exchange Server 2003 and in Microsoft Exchange 2000 Server.
MORE INFORMATION
Warning Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.
Typically, messages accumulate in the “Messages awaiting directory lookup" queue because the advanced queuing engine cannot categorize the messages. You can increase diagnostic logging for the MSExchangeDSAccess and MSExchangeTransport services to collect more information. To do this, follow these steps:
- Click Start, click Run, type regedit, and then press ENTER.
- Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeTransport\Diagnostics - Set all the categories under this registry subkey to 5.
- Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeDSAccess\Diagnostics - Set all categories under this registry subkey to 5.
- Exit Registry Editor.
However, after you increase the diagnostic logging for the MSExchangeDSAccess and MSExchangeTransport service, the following events may be logged in the Application log:
You can use any of the following methods to troubleshoot this issue.
Verify that the global catalog server is available
The Exchange Categorizer will connect to the global catalog server to perform LDAP queries. If the global catalog server is unavailable to perform LDAP queries, an event ID 8024 message may be logged in the Application log. Additionally, messages may remain in the "Messages awaiting directory lookup" queue. To resolve this issue, make sure that the global catalog server is available for LDAP queries. To do this, follow these steps:
- Verify whether the CPU usage on the global catalog server is high.
The Exchange Categorizer must connect to the global catalog server to perform LDAP queries. If CPU usage on the global catalog server is high, messages in Categorizer may be processed very slowly. Alternatively, messages may not be processed. This causes messages to remain in queue.
If the CPU usage on the global catalog server is high, troubleshoot the global catalog server first. - Run the DCDiag tool to verify that the Exchange server and the global catalog server or domain controller can communicate as expected.
- Check the global catalog server assignment and the domain controller assignment. To do this, follow these steps:
- Start Exchange System Manager.
- Right-click the server object, and then click Properties.
- On the Directory Access tab, make sure that the global catalog servers and the domain controllers that are listed are correct according to the organization topology. Make sure that the global catalog servers and the domain controllers are available.
Note You can manually assign global catalog servers and domain controllers if all the global catalog servers and the domain controllers that are listed are unavailable. However, we do not recommend this.
Verify that the Exchange servers have sufficient permissions
You can use Exchdump.exe to check the permissions and configurations of the Active Directory objects that are related to Exchange transport. For more information about the Exchdump.exe tool, click the following article number to view the article in the Microsoft Knowledge Base:
839116 Overview of the ExchDump tool for Exchange 2000 Server and for Exchange Server 2003
If Exchange Server 2003 or Exchange 2000 Server computers do not have sufficient permissions to obtain the attributes of the recipients, messages may remain in the "Messages awaiting directory lookup" queue. Additionally, event ID 9004, 9003, 929 and 6004 messages may be logged in the Application log.
To resolve this issue, make sure that inheritable permissions are permitted to propagate to the Exchange Server 2003 or Exchange 2000 Server object to which you are trying to send messages. To do this, follow these steps:
- Start Exchange System Manager, and then locate the Exchange Server 2003 or Exchange 2000 Server object to which you are trying to send messages.
- Right-click the server object, and then click Properties.
- Click the Security tab, and then click Advanced.
- Click to select the Allow inheritable permissions from the parent to propagate to this object and all child objects. Include these with entries explicitly defined here check box, and then click OK. If you receive the following message, click Yes to continue:
- Verify that the Allow inheritable permissions from parent to propagate to this object option is selected for each server that experiences this problem.
- Restart the Microsoft Exchange Routing Engine service and Simple Mail Transfer Protocol (SMTP) service.
Verify that the attributes of a user object are correct
There are several attributes of a user object that must be correct for messages to be categorized. If any of these attributes are incorrect, the message remains in the categorizer. And, no event ID messages are logged.
For more information, click the following article number to view the article in the Microsoft Knowledge Base:
281761 Attributes required to route messages through the Categorizer
Verify that the message archive location is valid if message archiving is enabled
When you send a message to a recipient that resides in a mailbox store that has message archiving enabled, the server that first processes the message will generate the message to the archive recipient. If the mailbox or the public folder that you configured as the message archive recipient is no longer a valid location, the message may remain in the “Messages awaiting directory lookup” queue. Additionally, event ID 9035, 9003, 9004 and 6004 messages may be logged in the Application log.
Note Message archiving is also known as message journaling.
To resolve this issue, make sure that the archive recipient for mailbox stores has not been deleted from Active Directory. To determine the archive recipient for a mailbox store, follow these steps:
- In Exchange System Manager, expand the Servers container.
- Expand the Storage Group container, right-click the mailbox store object to look for message archiving, and then click Properties.
- On the General tab, view the account that appears immediately under the Archive all messages sent or received by mailboxes on this store check box. This is the account that is being used as the archive recipient.
Note Make sure that you verify the journal recipient for each mailbox store object.
For more information, click the following article number to view the article in the Microsoft Knowledge Base:
884996 Messages remain in the "Messages awaiting directory lookup" SMTP queue in Exchange Server 2003 or in Exchange 2000 Server
Verify that the mailbox store on the SMTP bridgehead server is mounted
On the SMTP bridgehead server, make sure that the Information Store service is running and that the mailbox store is mounted. These conditions must be true because messages may have to be bifurcated if message archiving is enabled or a non-delivery report (NDR) is generated.
Note Sometimes one server is configured as both an SMTP bridgehead server and a front-end server.
Verify whether this issue occurs when you are sending a message to a large distribution list
When you send messages to a large distribution list, or you configure delivery restrictions based on distribution groups, messages will remain in the “Messages awaiting directory lookup” queue in Microsoft Exchange Server 2003.
For more information about how to resolve these issues, click the following article numbers to view the articles in the Microsoft Knowledge Base:
895407 In Exchange Server 2003, message delivery to local mailboxes and to external mailboxes is slower than you expect after you configure delivery restrictions based on distribution groups
832425 An e-mail message that you send to a dynamic distribution list is not delivered successfully in Exchange Server 2003
Verify whether any third-party software is installed on the Exchange server
Verify whether any third-party applications, antivirus programs, transport event sinks, or socket-level applications, such as firewall clients, are installed on the Exchange server. Temporarily disable or remove any third-party software and check to see whether the issue is resolved.
For more information, click the following article number to view the article in the Microsoft Knowledge Base:
920200 Mail flow stops and an event ID 5066 message is logged after you update the Kaspersky scan engine in Sybari Antigen 8.0 for Microsoft Exchange
245822 Recommendations for troubleshooting an Exchange Server computer with antivirus software installed
REFERENCES
823489 How to use Queue Viewer to troubleshoot mail flow issues in Exchange Server 2003
812298 Mail delivery is slow after you configure delivery restrictions that are based on a distribution list
Additional query words: exch2kp2w XCON
Keywords: kbfix kbprb KB251746
