Microsoft KB Archive/249171: Difference between revisions

From BetaArchive Wiki
(importing KB archive)
 
m (Text replacement - """ to """)
 
Line 48: Line 48:
Here is the current text from the Remarks section of the '''SET CENTURY''' Help topic:<br />
Here is the current text from the Remarks section of the '''SET CENTURY''' Help topic:<br />
<br />
<br />
&quot;Issue SET CENTURY TO without any additional arguments to restore the default century to the current century and ROLLOVER to the default value of the current year plus 50 years. In Visual FoxPro 5.0, issuing SET CENTURY TO without any additional arguments sets the century to 19 and ROLLOVER to zero.&quot;<br />
"Issue SET CENTURY TO without any additional arguments to restore the default century to the current century and ROLLOVER to the default value of the current year plus 50 years. In Visual FoxPro 5.0, issuing SET CENTURY TO without any additional arguments sets the century to 19 and ROLLOVER to zero."<br />
<br />
<br />
This implies that the century will be set to the century portion of the current system date. However, this only holds true for system dates where the two-digit year portion of the year is 50 or greater.<br />
This implies that the century will be set to the century portion of the current system date. However, this only holds true for system dates where the two-digit year portion of the year is 50 or greater.<br />
Line 82: Line 82:


=SetCent()
=SetCent()
=SetSysTime({^1900-01-01},&quot;10:30:15.00&quot;)
=SetSysTime({^1900-01-01},"10:30:15.00")
=SetCent()
=SetCent()
=SetSysTime({^1949-01-01},&quot;10:30:15.00&quot;)
=SetSysTime({^1949-01-01},"10:30:15.00")
=SetCent()
=SetCent()
=SetSysTime({^1950-01-01},&quot;10:30:15.00&quot;)
=SetSysTime({^1950-01-01},"10:30:15.00")
=SetCent()
=SetCent()
=SetSysTime({^1999-12-31},&quot;10:30:15.00&quot;)
=SetSysTime({^1999-12-31},"10:30:15.00")
=SetCent()
=SetCent()
=SetSysTime({^2000-01-01},&quot;10:30:15.00&quot;)
=SetSysTime({^2000-01-01},"10:30:15.00")
=SetCent()
=SetCent()
=SetSysTime({^2049-01-01},&quot;10:30:15.00&quot;)
=SetSysTime({^2049-01-01},"10:30:15.00")
=SetCent()
=SetCent()
=SetSysTime({^2050-01-01},&quot;10:30:15.00&quot;)
=SetSysTime({^2050-01-01},"10:30:15.00")
=SetCent()
=SetCent()
=SetSysTime({^2099-01-01},&quot;10:30:15.00&quot;)
=SetSysTime({^2099-01-01},"10:30:15.00")
=SetCent()
=SetCent()
=SetSysTime(ldolddate, ltoldtime)
=SetSysTime(ldolddate, ltoldtime)
Line 140: Line 140:


     * Send the message that the time has changed.
     * Send the message that the time has changed.
     m.retval = SendMessage(hwnd_broadcast, wm_timechange, &quot;&quot;, &quot;&quot;)
     m.retval = SendMessage(hwnd_broadcast, wm_timechange, "", "")


ENDPROC
ENDPROC
Line 153: Line 153:
     PRIVATE i, m.retstr
     PRIVATE i, m.retstr


     m.retstr = &quot;&quot;
     m.retstr = ""
     FOR i = 8 TO 0 STEP -8
     FOR i = 8 TO 0 STEP -8
         m.retstr = CHR(INT(m.wordval/(2^i))) + m.retstr
         m.retstr = CHR(INT(m.wordval/(2^i))) + m.retstr

Latest revision as of 12:51, 21 July 2020

Knowledge Base


INFO: Clarification of SET CENTURY Help Topic in Visual FoxPro 6.0 Help

Article ID: 249171

Article Last Modified on 8/14/2001



APPLIES TO

  • Microsoft Visual FoxPro 6.0 Professional Edition



This article was previously published under Q249171

SUMMARY

The SET CENTURY Help topic in the Visual FoxPro 6.0 product documentation contains a description of the behavior of issuing the SET CENTURY TO command without any further qualifiers. This is in the Remarks section. This article provides some additional information describing the behavior of the command.

Here is the current text from the Remarks section of the SET CENTURY Help topic:

"Issue SET CENTURY TO without any additional arguments to restore the default century to the current century and ROLLOVER to the default value of the current year plus 50 years. In Visual FoxPro 5.0, issuing SET CENTURY TO without any additional arguments sets the century to 19 and ROLLOVER to zero."

This implies that the century will be set to the century portion of the current system date. However, this only holds true for system dates where the two-digit year portion of the year is 50 or greater.

The actual behavior is that SET CENTURY TO sets the default century to the current century minus one if the two-digit year of the system date is less than 50, and to the current century if the two-digit year of the system date is 50 or greater.

MORE INFORMATION

The following program demonstrates the behavior of SET CENTURY TO for a range of dates. It sets the system date and time to a range of dates, and resets it to the original date and time when the program has completed.

NOTE: Do not run this program while you are running any other applications or services that depend on system dates. For example, having Microsoft Outlook running could trigger numerous meeting reminders. In addition, access to network resources such as shares and printers might not be available when the system date is artificially moved forward because access might be based on a time-dependent password.

* This program sets the system date and time
* to a range of values and resets it to the original values.
* A SET CENTURY TO is issued for each date setting.
* The date and time is then reset to the original values.
* The results are displayed in a text file called setcent.txt.

#DEFINE OUTPUTFILE 'setcent.txt'

LOCAL ldolddate, ltoldtime
ldolddate = DATE()
ltoldtime = TIME()

SET CENTURY ON

SET ALTERNATE TO OUTPUTFILE
SET ALTERNATE ON
?'VFP Version is '+VERSION()
?''

=SetCent()
=SetSysTime({^1900-01-01},"10:30:15.00")
=SetCent()
=SetSysTime({^1949-01-01},"10:30:15.00")
=SetCent()
=SetSysTime({^1950-01-01},"10:30:15.00")
=SetCent()
=SetSysTime({^1999-12-31},"10:30:15.00")
=SetCent()
=SetSysTime({^2000-01-01},"10:30:15.00")
=SetCent()
=SetSysTime({^2049-01-01},"10:30:15.00")
=SetCent()
=SetSysTime({^2050-01-01},"10:30:15.00")
=SetCent()
=SetSysTime({^2099-01-01},"10:30:15.00")
=SetCent()
=SetSysTime(ldolddate, ltoldtime)
=SetCent()

SET ALTERNATE OFF
SET ALTERNATE TO
MODIFY FILE OUTPUTFILE NOWAIT

PROCEDURE SetCent()
    ?'Current system date is '+DTOC(DATE())
    SET CENTURY TO
    ?'Current setting is SET CENTURY TO '+ALLTR(STR(SET('cent',1))) +' ROLLOVER '+ALLTR(STR(SET('cent',2)))
    ?''
ENDPROC

PROCEDURE SetSysTime
    PARAMETERS m.updtdate, m.updttime

    DECLARE SHORT SetLocalTime IN win32api STRING SystemTime

    * Use SendMessage to tell apps we've changed the system time.
    DECLARE INTEGER SendMessage IN win32api ;
        INTEGER WindowHandle, ;
        INTEGER MESSAGE, ;
        STRING Param1, ;
        STRING Param2

    * SendMessage constants.
    #DEFINE hwnd_broadcast 65535
    #DEFINE wm_timechange 30

    m.SystemTime = Word2Str(YEAR(m.updtdate)) + ;
        Word2Str(MONTH(m.updtdate)) + ;
        Word2Str(DOW(m.updtdate) - 1) + ;
        Word2Str(DAY(m.updtdate)) + ;
        Word2Str(VAL(LEFT(m.updttime, 2))) + ;
        Word2Str(VAL(SUBSTR(m.updttime, 4, 2))) + ;
        Word2Str(VAL(SUBSTR(m.updttime, 7, 2))) + ;
        Word2Str(VAL(RIGHT(m.updttime, 2)))

    m.retval = SetLocalTime(m.SystemTime)

    * Send the message that the time has changed.
    m.retval = SendMessage(hwnd_broadcast, wm_timechange, "", "")

ENDPROC

* Function Word2Str.
* Parameters: 16-bit value.
* Returns: low-high format string for use in structures
* requiring a WORD value.
PROCEDURE Word2Str
    PARAMETERS m.wordval

    PRIVATE i, m.retstr

    m.retstr = ""
    FOR i = 8 TO 0 STEP -8
        m.retstr = CHR(INT(m.wordval/(2^i))) + m.retstr
        m.wordval = MOD(m.wordval, (2^i))
    NEXT
    RETURN m.retstr

ENDPROC
                

REFERENCES

The code for setting the date and time was taken from the following Microsoft Knowledge Base article:

188897 HOWTO: Setting the System Date and Time Programmatically


Keywords: kbinfo kbdocfix KB249171