Microsoft KB Archive/247559

From BetaArchive Wiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Knowledge Base


Information About Primary and Secondary Windows Internet Naming Service Server Switch

Article ID: 247559

Article Last Modified on 11/1/2006



APPLIES TO

  • Microsoft Windows NT Workstation 4.0 Developer Edition
  • Microsoft Windows NT Workstation 4.0 Developer Edition
  • Microsoft Windows NT Workstation 4.0 Developer Edition
  • Microsoft Windows NT Workstation 4.0 Developer Edition
  • Microsoft Windows NT Workstation 4.0 Developer Edition
  • Microsoft Windows NT Workstation 4.0
  • Microsoft Windows NT Server 4.0 Standard Edition
  • Microsoft Windows NT 4.0 Service Pack 1
  • Microsoft Windows NT 4.0 Service Pack 2
  • Microsoft Windows NT 4.0 Service Pack 3
  • Microsoft Windows NT 4.0 Service Pack 4
  • Microsoft Windows NT 4.0 Service Pack 5
  • Microsoft Windows NT Server 4.0 Enterprise Edition
  • Microsoft Windows NT 4.0 Service Pack 4
  • Microsoft Windows NT 4.0 Service Pack 5



This article was previously published under Q247559

SUMMARY

This article describes the algorithm used by Windows Internet Naming Service (WINS) clients to switch back to the primary WINS server after registering with a secondary WINS server.

MORE INFORMATION

If the primary WINS server is not available during a WINS client name registration request, the WINS client may register with the secondary WINS server. When this occurs, the output of the ipconfig /all command on the WINS client lists the original primary WINS server as the secondary WINS server, and the original secondary WINS server as the primary WINS server. Also, further name queries are sent to the secondary WINS server.

The WINS client continues trying to contact its original primary WINS server for another 60 minutes, at 10 minute intervals. Then, the WINS client stops trying to register with the primary WINS server until the name registration reaches one half of the Time to Live (TTL) value. Note that if the secondary WINS server stops responding to name queries, the WINS client immediately tries to switch back to the primary WINS server. If you then run the nbtstat -RR command on the WINS client, a name release is sent to both WINS servers, and the TTL value is set to zero.

At this point, the WINS client follows the same registration procedure used when a computer is started. It attempts to contact its original primary WINS server, and follows the process described earlier in this article.


Additional query words: switchback

Keywords: kbinfo kbenv KB247559