Microsoft KB Archive/209974

From BetaArchive Wiki

Article ID: 209974

Article Last Modified on 10/11/2006



APPLIES TO

  • Microsoft Access 2000 Standard Edition



This article was previously published under Q209974

This article applies to a Microsoft Access database (.mdb) and to a Microsoft Access project (.adp).

Advanced: Requires expert coding, interoperability, and multiuser skills.

IN THIS TASK

SUMMARY

REFERENCES

SUMMARY

You can programmatically create toolbars and menu bars, as well as add and remove items from those bars. This article demonstrates how to do this.

back to the top

Set References to Use Command Bars

In Microsoft Access 2000, toolbars, shortcut menus, and menu bars are combined into a single CommandBars collection that you can control programmatically by using Visual Basic for Applications. You can modify any Microsoft Access built-in menu bars or toolbars, and you can create and modify custom toolbars, menu bars, and shortcut menus.

In order to program with command bars, you must set a reference to the Microsoft Office 9.0 Object Library. To do so follow these steps:

  1. While in the Visual Basic Editor, on the Tools menu, click References.
  2. In the References dialog box, click to select Microsoft Office 9.0 Object Library.
  3. Click OK.

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements. The following examples create command bars programmatically and assign actions to their controls. Example 1 creates a floating toolbar. Example 2 creates a docked menu bar.

back to the top

Example 1: Creating a Toolbar

  1. Open the sample database Northwind.mdb.
  2. Create a module and type the following procedures:

    '****************************************************************
    ' This procedure creates a new toolbar.
    '****************************************************************
    Sub AddNewCB()
       Dim CBar As CommandBar, CBarCtl As CommandBarControl
       On Error GoTo AddNewCB_Err
    
       ' Create a new floating toolbar and make it visible.
       Set CBar = CommandBars.Add(Name:="Sample Toolbar", Position:= _
          msoBarFloating)
       CBar.Visible = True
    
       ' Create a button with text on the bar and set some properties.
       Set CBarCtl = CBar.Controls.Add(Type:=msoControlButton)
       With CBarCtl
          .Caption = "Button"
          .Style = msoButtonCaption
          .TooltipText = "Display Message Box"
          .OnAction = "=MsgBox(""You pressed a toolbar button!"")"
       End With
    
       ' Create a button with an image on the bar and set some
       ' properties.
       Set CBarCtl = CBar.Controls.Add(Type:=msoControlButton)
       With CBarCtl
          .FaceId = 1000
          .Caption = "Toggle Button"
          .TooltipText = "Toggle First Button"
          .OnAction = "=ToggleButton()"
       End With
    
       ' Create a combo box control on the bar and set some properties.
       Set CBarCtl = CBar.Controls.Add(msoControlComboBox)
       With CBarCtl
          .Caption = "Drop Down"
          .Width = 100
          .AddItem "Create Button", 1
          .AddItem "Remove Button", 2
          .DropDownWidth = 100
          .OnAction = "=AddRemoveButton()"
       End With
       Exit Sub
       AddNewCB_Err:
       MsgBox "Error " & Err.Number & vbCr & Err.Description
       Exit Sub
    End Sub
    
    '****************************************************************
    ' This procedure is called from a button on the toolbar.
    ' It toggles the Visible property of another button on the bar.
    '****************************************************************
    Function ToggleButton()
       Dim CBButton As CommandBarControl
       On Error GoTo ToggleButton_Err
       Set CBButton = CommandBars("Sample Toolbar").Controls(1)
       CBButton.Visible = Not CBButton.Visible
       Exit Function
       ToggleButton_Err:
       MsgBox "Error " & Err.Number & vbCr & Err.Description
       Exit Function
    End Function
    
    '****************************************************************
    'This procedure is called from a combo box on the toolbar
    'It adds a button to the bar or removes it
    '****************************************************************
    Function AddRemoveButton()
       Dim CBar As CommandBar, CBCombo As CommandBarComboBox
       Dim CBNewButton As CommandBarButton
       On Error GoTo AddRemoveButton_Err
       Set CBar = CommandBars("Sample Toolbar")
       Set CBCombo = CBar.Controls(3)
       Select Case CBCombo.ListIndex
          'If Create Button is selected, create a button on the bar
          Case 1
             Set CBNewButton = CBar.Controls.Add(Type:=msoControlButton)
             With CBNewButton
                .Caption = "New Button"
                .Style = msoButtonCaption
                .BeginGroup = True
                .Tag = "New Button"
                .OnAction = "=MsgBox(""This is a new button!"")"
             End With
          ' Find and remove the new button if it exists.
          Case 2
             Set CBNewButton = CBar.FindControl(Tag:="New Button")
             CBNewButton.Delete
       End Select
       Exit Function
       AddRemoveButton_Err:
       ' If the button does not exist.
       If Err.Number = 91 Then
          MsgBox "Cannot remove button that does not exist!"
          Exit Function
       Else
         MsgBox "Error " & Err.Number & vbCr & Err.Description
         Exit Function
       End If
    End Function
                        
  3. To test this function, type the following line in the Immediate window, and then press ENTER:

    AddNewCB
                        
  4. Switch back to the Access window and you will see a floating toolbar on the screen.
  5. Click the word "Button" on the toolbar and note the message box that appears.
  6. Click the button with the light bulb image and note that "Button" disappears. Click it again and "Button" reappears.
  7. Select Create Button in the combo box and note that a button called New Button is added to the toolbar.
  8. Select Remove Button in the combo box and note that New Button is removed from the toolbar.

back to the top

Example 2: Creating a Menu Bar

  1. Open the sample database Northwind.mdb.
  2. Create a module and type the following procedures:

    '****************************************************************
    ' This procedure creates a new menu bar.
    '****************************************************************
    Sub AddNewMB()
       Dim MBar As CommandBar, MBarCtl As CommandBarControl
       Dim MBarPopup As CommandBarPopup, MBarSubCtl as CommandBarControl
       On Error GoTo AddNewMB_Err
    
       ' Create a new menu bar and dock it on the left.
       Set MBar = CommandBars.Add(Name:="Sample Menu Bar", Position:= _
          msoBarLeft, MenuBar:=True, Temporary:=False)
       ' Make the menu bar visible.
       MBar.Visible = True
       ' Prevent users from undocking the menu bar.
       MBar.Protection = msoBarNoMove
    
       ' Create a popup control on the bar and set its caption.
       Set MBarCtl = MBar.Controls.Add(Type:=msoControlPopup)
       MBarCtl.Caption = "Displa&y"
    
       ' Create 2 controls on the Display popup and set some properties.
       Set MBarSubCtl = MBarCtl.Controls.Add(Type:=msoControlButton)
       With MBarSubCtl
          .Style = msoButtonIconAndCaption
          .Caption = "E&nable ClickMe"
          .FaceId = 59
          .OnAction = "=ToggleClickMe()"
          .Parameter = 1
          .BeginGroup = True
       End With
       Set MBarSubCtl = MBarCtl.Controls.Add(Type:=msoControlButton)
       With MBarSubCtl
          .Style = msoButtonIconAndCaption
          .Caption = "Di&sable ClickMe"
          .FaceId = 276
          .OnAction = "=ToggleClickMe()"
          .Parameter = 2
          .BeginGroup = True
       End With
    
       ' Add another control to the menu bar.
       Set MBarCtl = MBar.Controls.Add(Type:=msoControlButton)
       With MBarCtl
          .BeginGroup = True
          .Caption = "&ClickMe"
          .Style = msoButtonCaption
          .OnAction = "=MsgBox(""You clicked ClickMe"")"
       End With
    
       ' Add a control to make this menu bar invisible and bring back
       ' the system menu bar.
       Set MBarCtl = MBar.Controls.Add(Type:=msoControlButton)
       With MBarCtl
          .BeginGroup = True
          .Caption = "&Show Northwind Menu Bar"
          .Style = msoButtonCaption
          .OnAction = "=SampleMenuDisable()"
       End With
       Exit Sub
       AddNewMB_Err:
       MsgBox "Error " & Err.Number & vbCr & Err.Description
       Exit Sub
    End Sub
    
    '****************************************************************
    ' This procedure uses the Parameter property of a command bar
    ' control to execute a different action depending on which item
    ' you click on a popup menu.
    '****************************************************************
    Function ToggleClickMe()
       Dim MyMenu As CommandBar
       Dim MBarClickMe As CommandBarControl
       On Error GoTo ToggleClickMe_Err
       Set MyMenu = CommandBars("Sample Menu Bar")
       Set MBarClickMe = MyMenu.Controls(2)
       ' The ActionControl property of command bars returns the control
       ' whose OnAction property is running this procedure.
       With CommandBars.ActionControl
          Select Case .Parameter
             Case 1
                MBarClickMe.Enabled = True
             Case 2
                MBarClickMe.Enabled = False
          End Select
       End With
       Exit Function
       ToggleClickMe_Err:
       MsgBox "Error " & Err.Number & vbCr & Err.Description
       Exit Function
    End Function
    
    '****************************************************************
    ' This function restores the original menu bar. Because there can
    ' only be one system menu bar, you must hide the sample menu bar
    ' when you want to bring back the previous system menu bar.
    '****************************************************************
    Function SampleMenuDisable()
       Application.CommandBars("Sample Menu Bar").Visible = False
       Application.CommandBars("NorthwindCustomMenuBar").Visible = True
    End Function
                        
  3. To test this function, type the following line in the Immediate window, and then press ENTER:

    AddNewMB
                        
  4. Switch back to the Access window and you will see a docked menu bar on the left side of the screen.
  5. Click the ClickMe button on the menu and note the message box that appears.
  6. Click the Display button, and then click Disable ClickMe. Note that the ClickMe button is dimmed.
  7. Click the Display button, and then click Enable ClickMe. Note that the ClickMe button is enabled.
  8. Click the Show Northwind Menu Bar button to restore the original system menu bar.

back to the top

REFERENCES

This article explains a technique demonstrated in the sample file, FrmSmp00.mdb. For information about how to obtain this sample file, please see the following article in the Microsoft Knowledge Base:

233324 ACC2000: Microsoft Access 2000 Sample Forms Database Available in Download Center



For more information on how to programmatically add and remove items on command bars, please see the following article in the Microsoft Knowledge Base:

172300 ACC97: Command Bar Wizard Available in Download Center




back to the top





Keywords: kbhowto kbhowtomaster kbprogramming kbusage KB209974