Microsoft KB Archive/184244

From BetaArchive Wiki
Knowledge Base


XADM: Inbound Intersite Replication Fails With No Errors Logged In Event Viewer

Article ID: 184244

Article Last Modified on 10/28/2006



APPLIES TO

  • Microsoft Exchange Server 4.0 Standard Edition
  • Microsoft Exchange Server 5.0 Standard Edition



This article was previously published under Q184244


SYMPTOMS

Intersite directory replication fails without any errors logged in the event log. This problem occurs even if the following recommended Directory Service logging levels are enabled on both bridgeheads:

Replication = MAX Internal Processing = MIN


CAUSE

An area of memory holding a "USN" value is prematurely freed. Afterwards, that area of memory is dereferenced again. If that memory has been overwritten, a comparison fails, which results in the replication update message returned from the target bridgehead being discarded as invalid.

Under normal operating conditions, the likelihood that the memory address will be overwritten before it is dereferenced is miniscule. However, this failure is almost guaranteed when Windows NT runs under certain memory diagnostics and debugging modes. These modes are enabled by setting specific registry keys, and are typically only enabled during server debugging or software performance profiling.


STATUS

Microsoft has confirmed this to be a problem in Microsoft Exchange Server version 4.0. This problem has been corrected in the latest U.S. Service Pack for Microsoft Exchange Server version 4.0. For information on obtaining the Service Pack, query on the following word in the Microsoft Knowledge Base (without the spaces):

S E R V P A C K



Microsoft has confirmed this to be a problem in Microsoft Exchange Server version 5.0. This problem has been corrected in the latest U.S. Service Pack for Microsoft Exchange Server version 5.0. For information on obtaining the Service Pack, query on the following word in the Microsoft Knowledge Base (without the spaces):

S E R V P A C K


MORE INFORMATION

A normal intersite replication sequence involves the repetition of the following:

  1. The originating site submits (small) messages requesting updates for various naming contexts from a target replication bridgehead.
  2. The target site responds with (larger) update messages to those contexts.
  3. The originating site receives these messages with updates and processes them.

This sequence is repeated until there are no more updates to return for a given context.

This can be traced and observed in the Application Event log by enabling the following Directory Service logging levels on both bridgeheads:

Replication = MAX Internal Processing = MIN


When you make a directed request for an update (new and modified objects) of a remote site context from the originating bridgehead server to the target bridgehead responsible for providing that site context, the following is revealed in the Windows NT Application Event Log:

NOTE: A separate update request message is generated from the originating bridgehead for the Site, the Site-configuration, and perhaps the Address Book Views contexts that will be updated.

Part A: From the requesting site's log:

Make request for site context.

   2005
   (...logged when forcing an update request via Admin UI)
   Calling dra_replica_synchronize: NC = '/o=<orgname>/ou=<target-sitename-
   of-update-request>', destination DS = '<local servername>', source DS =
   '<target BH's DSA DN>', flags = 0x00004000.

   1068
   (...also logged for intrasite replication)
   Internal event: The directory replication agent (DRA) was asked to
   synchronize replica of /o=<orgname>/ou=<target-sitename-of-update-
   request> from directory ID <target BH's DSA DN> with options 4000.

   1100
   During intersite replication, the directory replication agent (DRA)
   successfully submitted a message with a length of 120 while requesting
   updates in naming context /o=<orgname>/ou=<target-sitename- of-update-
   request> from the directory at <target BH's DSA DN>.

   ("length of xxx" for update requests can vary, but will be small)

   1058
   (...also logged for intrasite replication)
   Internal event: The directory replication agent (DRA) call completed
   successfully.

   2021
  (...logged when forcing an update request via Admin UI)
   An update of the replica of naming context '/o=<orgname>/ou=<target-
  sitename-of-update-request>' was requested on server '<local
  servername>'.
                


Make request for site-configuration context (same sequence again).

   2005
   Calling dra_replica_synchronize: NC = '/o=<orgname>/ou=<target-sitename-
   of-update-request>/cn=Configuration', destination DS = 'local
   servername>', source DS = '<target BH's DSA DN>', flags = 0x00004000.

   1068
   Internal event: The directory replication agent (DRA) was asked to
   synchronize replica of...

   1100
   During intersite replication, the directory replication agent (DRA)
   successfully submitted a message with a length of 144 while requesting
   updates in naming context /o=<orgname>/ou=<target-sitename- of-update-
   request>/cn=Configuration from the directory at <target BH's DSA DN>.

   ("length of xxx" for update requests can vary, but will be small)

   1058
   Internal event: The directory replication agent (DRA) call completed
   successfully.

   2021
   An update of the replica of naming context '/o=<orgname>/ou=<target-
   sitename-of-update-request>/cn=Configuration' was requested on server
   '<local servername>'.
                


The MTA moves these request messages between originating and target bridgeheads.

Part B: From the target site's log:

The request is received at the target bridgehead.

   1099
   During intersite replication, the directory replication agent (DRA)
   received a message with a length of 120 from the directory at
   <originating BH's DSA DN>. Received an X.400 MTS Identifier of c=US;a=
   ;p=Microsoft;l=RICKBOLLT166-980403162551Z-29.

   ("Message length" is the same as what was logged in originator's 1100
   event. MTS-ID established for possible message tracking.)

   1070
   Internal event: Directory <an Invocation-ID or servername> asked the
   directory replication agent (DRA) to get changes from naming context
   /o=<orgname>/ou=<target-sitename-of-update-request> starting at update
   sequence number (USN) 97747 with flags a80 and sensitivity 100.

   ("Starting USN" established. Expect objects under the requested context
   with a "USN-Source" greater than this USN to be returned).
                


Collect first 512 object changes under requested "site context" and compress message (if necessary).

   1071
   Internal event: The directory replication agent (DRA) got changes
   returning 512 objects and entries up to update sequence number (USN)
   <xxxxx>.

   (USN numbers aren't necessarily sequential within a given context, so
   the USN returned is not necessarily "USNrequested + 512").

   1199
   The replication message has been compressed from 454758 bytes to 102014
   bytes.
                


Submit reply to request for updates for site context.

   1101
   During intersite replication, the directory replication agent (DRA)
   successfully submitted a message with a length of 102014 while updating
   the replica of naming context /o=<orgname>/ou=<target- sitename-of-
   update-request> on the directory at <originating BH's DSA DN>. Received
   an X.400 MTS Identifier of c=US;a=
   ;p=Microsoft;l=RICKBOL66980403113339CK004500.

   ("Message length" will match the originator's 1100 event, below. MTS- ID
   established for possible message tracking.)
                


Receive request for updates site-configuration context (same sequence as above).

   1099
   During intersite replication, the directory replication agent (DRA)
   received a message with a length of 144 from the directory at
   <originating BH's DSA DN>. Received an X.400 MTS Identifier of c=US;a=
   ;p=Microsoft;l=RICKBOLLT166-980403162552Z-30.

   1070
   Internal event: Directory <an Invocation-ID or servername> asked the
   directory replication agent (DRA) to get changes from naming context
   /o=<orgname>/ou=<target-sitename-of-update-request>/cn=Configuration
   starting at update sequence number (USN) 97794 with flags a80 and
   sensitivity 100.

   ("Starting USN" established. Expect objects under the requested context
   with a USN-Source greater than this USN to be returned).
                


Collect first 512 object changes under requested "site-configuration context" and compress message (if necessary).

   1071
   Internal event: The directory replication agent (DRA) got changes
   returning 512 objects and entries up to update sequence number (USN)
   <xxxxx>.

   1199
   The replication message has been compressed from 580483 bytes to 210486
   bytes.
                


Submit reply to request for updates for site context.

   1101
   During intersite replication, the directory replication agent (DRA)
   successfully submitted a message with a length of 210486 while updating
   the replica of naming context /o=<orgname>/ou=<target- sitename-of-
   update-request>/cn=Configuration on the directory at <originating BH's
   DSA DN>. Received an X.400 MTS Identifier of c=US;a=
   ;p=Microsoft;l=RICKBOL66980403113340CL004500.
                


Larger update response messages returned by the target bridgehead. The MTA moves these response messages between target & originating bridgeheads.

Part C: From the requesting site's log (later):

The responses are received by the originating bridgehead.

   1099
   During intersite replication, the directory replication agent (DRA)
   received a message with a length of 102014 from the directory at <target
   BH's DSA DN>.

   ("Message length" will match target site's compressed response message
   size logged in its' 1100 event from Part B: above).

   1099
   During intersite replication, the directory replication agent (DRA)
   received a message with a length of 210486 from the directory at <target
   BH's DSA DN>.

   ("Message length" will match target site's response message size logged
   in its' 1100 event from Part B: above).
                


End log examination.

As mentioned above, this A, B, C sequence is repeated until there are no more updates to return regarding a given context. That is, after processing each batch of updates that are returned, the originating site will requests more updates for that context "starting with USN xxxxxx", but the target has no objects above that USN value to return.

In the case of the error documented in this article, the signature behaviors are as follows:

  • The target site will return a large message to the originating site, but after processing this update, no changes in the Directory appear.
  • The A, B, C sequence documented above will not continue.
  • The "Reps-From, Replica-Link, USN" value of the target-context (site or site-configuration) will not increase.

To examine the appropriate "Reps-From, Replica-Link, USN," perform the following steps:

  1. Launch Admin in raw mode against the originating server.
  2. Select the "<Orgname>\<Target-sitename>" or "<Orgname>\<Target- sitename>\Configuration" object.
  3. From the File menu, select Raw Properties.
  4. In the Object Attributes box, highlight the "Reps-From" object attribute.
  5. Click the Viewer button, highlight "Replica Link," and then click OK.
  6. Note the USN value listed.

Furthermore, if a subsequent request for an update to that same context is manually performed, it can be noted that the target site will again log the same USN value in the 1070 event (documented above in Part B). This confirms that the update response message isn't reaching the originating site, or that the originating site is not processing the message that is returned to it. If a 1099 event is logged in the originating site (Part C, above), thus confirming that the update response has been received by the originating DRA, but no updates appear, it is likely that the message is being discarded.


Keywords: kbhotfixserver kbqfe kbfix kbprb KB184244