Microsoft KB Archive/180366

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 11:30, 21 July 2020 by X010 (talk | contribs) (Text replacement - "&" to "&")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Knowledge Base


How To Determine When a Page Is Done Loading in WebBrowser Control

Article ID: 180366

Article Last Modified on 7/1/2004



APPLIES TO

  • Microsoft Internet Explorer 4.0 128-Bit Edition
  • Microsoft Internet Explorer 4.01 Service Pack 2
  • Microsoft Internet Explorer 5.0
  • Microsoft Internet Explorer 5.5



This article was previously published under Q180366

SUMMARY

The Internet Explorer WebBrowser control fires the DocumentComplete event when it is finished downloading a Web page. You can create a event handler function in your application for this event. This article describes the steps to take in determining if a the WebBrowser control is finished downloading a Web page.

MORE INFORMATION

The WebBrowser control fires the DocumentComplete event when its ReadyState property is changed to READYSTATE_COMPLETE. This indicates that the WebBrowser control has completed downloading the Web page. Here are some important points regarding this event:

  • In the case of a page with no frames, DocumentComplete is fired once after everything is done.
  • In case of multiple frames, DocumentComplete gets fired multiple times. Not every frame fires this event, but each frame that fires a DownloadBegin event fires a corresponding DocumentComplete event.
  • The DocumentComplete event has a IDispatch* parameter, which is the IDispatch of the frame (shdocvw) for which DocumentComplete is fired.
  • The top-level frame fires the DocumentComplete in the end. So, to check if a page is done downloading, you need to check if the IDispatch* parameter is same as the IDispatch of the WebBrowser control.

    For Visual Basic, here is code that performs this check:

    Private Sub WebBrowser1_DocumentComplete(ByVal pDisp As Object,
                                             URL As Variant)
       If (pDisp Is WebBrowser1.Object) Then
          Debug.Print "Web document is finished downloading"
       End If
    End Sub
                        

To handle the DocumentComplete event in Visual C++ and determine if the download of the Web page is complete, follow these steps.

Note that the steps you follow depend on the way you use the WebBrowser control.

  • If you are creating the WebBrowser control in a CWnd/CView object, you must follow steps 1 to 4.
  • If you are creating the WebBrowser control in a CDialog/CFormView object, only need to follow step 4.
  • If you are using the CHtmlView class provided with Visual C++ 6.0, override CHtmlView::DocumentComplete() and follow step 4, using the m_pBrowserApp member of the CHtmlView class to access the WebBrowser control.
  1. Define the OnDocumentComplete method in the header file for your CWnd/CView-derived class:

    afx_msg void OnDocumentComplete(LPDISPATCH lpDisp,
                                    VARIANT FAR* URL);
                        
  2. Declare the event sink in the same header file:

    DECLARE_EVENTSINK_MAP()
                        
  3. In the implementation file (.cpp) for your CWnd/CView-derived class, implement the event sink map:

    BEGIN_EVENTSINK_MAP(CYourView, CView)
       ON_EVENT(CWBTstView, ID_WEB_BROWSE, 259 /* DocumentComplete */,
                OnDocumentComplete, VTS_DISPATCH VTS_PVARIANT)
    END_EVENTSINK_MAP()
                        
  4. Implement the OnDocumentComplete method:

    void CWBTstView::OnDocumentComplete(LPDISPATCH lpDisp,
                                        VARIANT FAR* URL)
    {
       IUnknown*  pUnk;
       LPDISPATCH lpWBDisp;
       HRESULT    hr;
    
       pUnk = m_webBrowser.GetControlUnknown();
       ASSERT(pUnk);
    
       hr = pUnk->QueryInterface(IID_IDispatch, (void**)&lpWBDisp);
       ASSERT(SUCCEEDED(hr));
    
       if (lpDisp == lpWBDisp )
       {
          // Top-level Window object, so document has been loaded
          TRACE("Web document is finished downloading\n");
       }
    
      lpWBDisp->Release();
    }
                        

This approach works when the WebBrowser control navigates to a page that changes the top-level frame. Say if the navigation occurs within a frame itself, then the final DocumentComplete that is fired is that of the frame and not the top-level frame. For example, consider the following scenario.

The WebBrowser control is hosting a frameset. Within one frame of the frameset, the user clicks on a link that opens a new page in the frame itself and keeps the rest of the frameset intact. The new page could contain multiple frames again. So, there will be multiple DocumentComplete notifications (one for each new frame). But, since the top-level frame has not changed, the final DocumentComplete would be that of the frame that has changed.

If you are interested in checking for the final document complete in this scenario, you could do the following:

Check if the IDispatch parameter of the DocumentComplete is the same as the IDispatch parameter of first NavigateComplete2 event. Since the first NavigateComplete2 is of the top-level frame and the last DocumentComplete is also of the top-level frame, doing a comparison in such a fashion will tell whether the page is done downloading.


Here is some sample C++ code:

LPDISPATCH glpDisp = NULL; // global LPDISPATCH, can also
                           // be of class scope

// NavigateComplete2 event
void CWebbrDlg::OnNavigateComplete2Explorer1(LPDISPATCH pDisp,
                                             VARIANT FAR* URL)
{
   // Check if glpDisp is NULL. If NULL, that means it is
   // the top level NavigateComplete2. Save the LPDISPATCH
   if (!glpDisp)
      glpDisp = pDisp;
}

void CWebbrDlg::OnDocumentCompleteExplorer1(LPDISPATCH pDisp,
                                            VARIANT FAR* URL)
{
   if (glpDisp && glpDisp == pDisp)
   {
      // if the LPDISPATCH are same, that means
      // it is the final DocumentComplete. Reset glpDisp
      TRACE("Document is done downloading");
      glpDisp = NULL;
   }
}
                


Additional query words: DocumentComplete

Keywords: kbhowto KB180366