Microsoft KB Archive/175141

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 10:07, 21 July 2020 by X010 (talk | contribs) (Text replacement - """ to """)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Knowledge Base


Cluster Service Ignores Network Cards

Article ID: 175141

Article Last Modified on 11/1/2006



APPLIES TO

  • Microsoft Windows NT Server 4.0 Enterprise Edition
  • Microsoft Cluster Server 1.1



This article was previously published under Q175141

SYMPTOMS

If you install the Remote Access Service (RAS) with Microsoft Cluster Server (MSCS), network adapters may be ignored by the cluster software.


RESOLUTION

NOTE: For additional information before you begin this workaround, please see the following article in the Microsoft Knowledge Base:

ARTICLE-ID: 162205
TITLE : "Stop 0x1E" Message Reinstalling Windows NT with SP3 and RAS

To work around this problem, uninstall RAS and the network card(s) that are not being detected. Then reinstall the network card(s), followed by RAS.

After you reinstall RAS, it is possible you may encounter one or both of the following errors:

  • Your computer restarts repeatedly.
  • You receive the following error message:

    STOP: 0x0000001E (0xC0000005, 0xFF1BBD79, 0x00000000, 0x00000038)
    KMODE_EXCEPTION_NOT_HANDLED Address ff1bbd79 has base at ff1ae000 - tcpip.sys

If you receive either or both of these errors, refer back to the Knowledge Base article mentioned above.


Additional query words: ignore NIC MSCS server cluster

Keywords: kbsetup KB175141