Microsoft KB Archive/174699

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 11:30, 21 July 2020 by X010 (talk | contribs) (Text replacement - "&" to "&")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Knowledge Base


XFOR: Customizing LinkAge Connector Logged Messages

Article ID: 174699

Article Last Modified on 10/28/2006



APPLIES TO

  • Microsoft Exchange Server 4.0 Standard Edition



This article was previously published under Q174699

SUMMARY

For purposes of localization or if the customer wants to improve the clarity of the logged messages in the LinkAge Notes Connector, it is possible to edit the text of the logged messages that the LinkAge Notes Connectors generate. It is also possible to change the message level of the message to a more important or less important level.

MORE INFORMATION

The Linkage\Msgs directory contains external message (.msg) files. The names of the files typically correspond to individual connector processes.

The following is part of a .msg file. We can discuss its format.

  1, 1, "Operating system error &1 from &2"
  2, 2, "GRC error &2 received from &1"
  10, 4, "Warning &1: Could not query the &3 keyword from the &2 section of
         the INI file"
  11, 2, "Error &1: Could not open the message file &2"
  12, 2, "Error &1: Could not register &2 with the Event Manager"
  13, 1, "Could not allocate &1 bytes for a &2 object"
  14, 1, "An invalid parameter was passed to &1"
                

The first number in each line is the message number and it also appears in the Message Number column in the Log Browser in LinkAge Administrator. The connector generates messages by specifying the message number.

The second number is the Message Level, indicating the importance of the message itself. It is displayed at the very beginning of each line in the Log Browser. It shows a red stop sign for level 1 messages, a yellow '2' for warning/important messages, blue '3' for normal informational messages, gray '4' for troubleshooting messages, and dark gray '5' for installation assist/debug messages.

The third entry is the text string of the message. Note that the text string will usually have variables like &1, &2, and so forth. These are variables that the connector will provide when it generates the message.

An example of changing the text string of a message follows. Message # 23366 has the entry:

    23366, 3, "Opening session with SNA Server"
                

You need to search all .msg files to see which files contain this message Number (you can use a text editor to do this). If you want to change this text string (or message level), you need to change it in all .msg files that have this entry, not just the .msg file that corresponds to the process.

In this example, Lslmeens.msg is the only .msg file that has this entry. Use any text editor to open Lslmeens.msg in the C:\Linkage directory and change the line to read

   23366, 4, "Allocating session with Host application"
                

For this change to take affect, you will need to stop and start the LinkAge Controller service. The result should be that any time message number 23366 is generated to the log, the new text and message level will appear.

Keywords: kbinfo KB174699