Microsoft KB Archive/173927

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 15:37, 18 July 2020 by 3155ffGd (talk | contribs) (importing KB archive)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Article ID: 173927

Article Last Modified on 8/20/2007



APPLIES TO

  • Microsoft Word 97 Standard Edition



This article was previously published under Q173927


SYMPTOMS

If you have a Graphics Blaster 3D video card, when you start Microsoft Word 97, Word may stop responding.

CAUSE

This problem may occur when you install any of the following video drivers that ship with Graphics Blaster 3D Installation CD (DISK.ID - G334-CDSTD-2- US):

   File name        Version
   ----------------------------------
   Ma33xw95.drv     4.03.00.2101-1.04
   Ma33xw95.vxd     4.03.00.2101-1.04
   Ma33xdd.dll      4.03.00.2101-1.04
                

To determine what version of the video driver you have, follow these steps:

  1. Click the Start button, point to Settings, and then click Control Panel.
  2. In Control Panel, double-click the System icon.
  3. On the Device Manager tab, double-click the Display Adapters icon.
  4. Double-click the Graphics Blaster 3D icon.
  5. Click the Driver tab.
  6. Click Driver File Details. Under Driver Files, click to select the file name of the driver, and verify the version number under File Version.


WORKAROUND

To work around this problem, use either of the following methods.

Method 1: Use a Different Animated Cursor

  1. Click Start, point to Settings, and then click Control Panel.
  2. Double-click the Mouse icon.
  3. On the Pointers tab, select a different pointer or scheme.
  4. Click OK.

If this method does not work, install Microsoft Plus! or load a Microsoft Plus! theme that ships with its own set of cursors.

Method 2: Decrease the Graphics Hardware Acceleration

Click the Start button, point to Settings, and then click Control Panel. In the Control Panel, double-click the System icon. On the Performance tab, click Graphics. Choose a Hardware Acceleration setting with less acceleration. Note that the Hardware Acceleration slider has four settings: Full, Most, Basic, and None. Each of these settings is described below, in order of decreasing acceleration. Full:

This is the default setting, which allows for full hardware acceleration.

Most:

The Most setting applies to Western Digital (WD) or S3-compatible drivers. If you have problems with the way the mouse pointer appears on the screen, try the Most setting.

This setting adds SWCursor=1 to the [Display] section of the System.ini file, which turns off the hardware cursor.

NOTE: This setting is similar to using the /Y switch with some versions of the MS-DOS-level Microsoft Mouse driver.

Basic:

The Basic setting applies to S3-compatible video drivers. If your computer seems to stop responding randomly, try the Basic setting.

This setting makes the following changes to your Win.ini and System.ini files:

  • Adds SafeMode=1 to the [Windows] section of the Win.ini file, which allows for basic acceleration only, for example, pattern bit block transfer (bitblt) and screen-to-screen bitblt.


  • Adds MMIO=0 to the [Display] section of the System.ini file, which turns off memory-mapped input/output (I/O) for S3- compatible drivers.


  • Adds SWCursor=1 to the [Display] section of the System.ini file, which turns off the hardware cursor.

None:

The None setting applies to S3-compatible video drivers. If your computer seems to stop responding randomly, and the Basic setting does not resolve the problem, try the None setting.

This setting makes the following changes to your Win.ini and System.ini files:

  • Adds SafeMode=2 to the [Windows] section of the Win.ini file, which turns off all video card acceleration. For example, the graphics device interface (GDI) calls the device-independent bitmap (DIB) engine directly for screen drawing, rather than using the display driver.


  • Adds MMIO=0 to the [Display] section of the System.ini file, which turns off memory-mapped I/O for S3-compatible drivers.


  • Adds SWCursor=1 to the [Display] section of the System.ini file, which turns off the hardware cursor.


STATUS

Creative Labs has confirmed this to be a problem in the current versions of the Graphics Blaster 3D video drivers. Creative Labs is working on new drivers, and will correct this problem in the next release of the drivers.

MORE INFORMATION

The Graphics Blaster 3D video drivers are manufactured by Creative Labs, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

REFERENCES

You may contact Creative Labs at the following phone numbers:

Creative Labs (405) 742-6622 Technical support IVR
Creative Labs (405) 742-6655 Tech support queue (direct)
Creative Labs (405) 742-6660 BBS - 1200/2400 baud access
Creative Labs (405) 742-6662 Automated reply service
Creative Labs (405) 742-6660 BBS - 9600/14,400 baud access


The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Microsoft in no way guarantees the accuracy of this third-party contact information.

For additional information, please see the following articles in the Microsoft Knowledge Base:

123334 Requirements for Animated Cursors

127139 Troublshooting Video Problems in Windows95



Additional query words: kbref win95 winboot creative 8.0 8.00

Keywords: kbdisplay kbenv kbpending kbprb KB173927