Article ID: 173753
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Server 4.0, Terminal Server Edition
- Microsoft Windows NT Workstation 4.0 Developer Edition
- Microsoft Windows NT Server 4.0 Standard Edition
This article was previously published under Q173753
SYMPTOMS
After you upgrade your Windows NT Dynamic Host Configuration Protocol (DHCP) clients to Service Pack 2 or later, and you are using non-Windows NT DHCP servers, you may begin receiving error messages indicating duplicate IP addresses on your network, displayed by DHCP clients.
CAUSE
Windows NT Service Pack 2 includes an update to the DHCP client that allows the client to send a new packet type to the DHCP server. This new packet, DHCP DECLINE, lacks the Client ID in the DHCP Options field. Some non- Windows NT DHCP servers may not process the DECLINE packet, which can create duplicate IP addresses on the network.
RESOLUTION
To resolve this problem, obtain the latest service pack for Windows NT 4.0 or Windows NT Server 4.0, Terminal Server Edition. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
152734 How to Obtain the Latest Windows NT 4.0 Service Pack
STATUS
Microsoft has confirmed that this is a problem in Windows NT 4.0 and Windows NT Server 4.0, Terminal Server Edition. This problem was first corrected in Windows NT 4.0 Service Pack 4.0 and Windows NT Server 4.0, Terminal Server Edition Service Pack 4.
MORE INFORMATION
Windows NT Service Pack 2 includes an update to the DHCP client that improves the handling of duplicate IP addresses by workstations. Upon receiving a DHCP lease, it uses address resolution protocol (ARP) to determine the assigned IP address. If a response is received (indicating that the address is already in use by another device on the network), it sends a DHCP decline to the server. A Windows NT DHCP Server then marks the address as "bad" and does not attempt to assign that IP address to any other device. The client resends a DHCP DISCOVER packet and starts the lease process again.
RFC 2131 contains the following statement about the required use of client ID in Section 2, page 9:
If a client uses a 'client identifier' in one message, it MUST use that same identifier in all subsequent messages, to ensure that all servers correctly identify the client. For additional information, please see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: ARTICLE-ID: 161430
TITLE : DHCP: Detecting and Flagging Duplicate IP Addresses
This problem will not arise if you accept the media access control address as the default client ID (CID) and use a Windows NT DHCP Server, because the Windows NT DHCP server will look elsewhere in the packet for the media access control address of the client. If you choose to implement custom CIDs or use a third-party DHCP server, the IP address will not be marked as a Bad_Address. There will be duplicate IP addresses on the network if the DHCP server does not have duplicate address detection enabled.
For additional information, please see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: 172408
TITLE: DHCP: Customer DHCP Client Identifiers for Windows NT
Additional query words: sp2 client sp-2
Keywords: kb3rdparty kbbug kbfix KB173753
