Article ID: 173607
Article Last Modified on 10/31/2006
APPLIES TO
- Microsoft Windows NT Server 3.51
- Microsoft Windows NT Server 4.0 Standard Edition
This article was previously published under Q173607
IMPORTANT: This article contains information about editing the registry. Before you edit the registry, make sure you understand how to restore it if a problem occurs. For information on how to do this, view the "Restoring the Registry" online Help topic in Regedit.exe or the "Restoring a Registry Key" online Help topic in Regedt32.exe.
SYMPTOMS
When you use Microsoft Windows 95 Dial-up Networking to access a remote network via a RAS member server that has been configured to use only the IPX/SPX protocol, you may receive the following error message when the remote Windows NT domain controller attempts to send back a logon response through the RAS member server:
After receiving the error message, the dial-up client may still have access to the remote network (without authentication), and may be able to access some resources on the domain.
CAUSE
The RAS member server cannot authenticate logon attempts, so it forwards the NetBIOS broadcast (type 20 packets) to the domain controller on the local area network (LAN). The domain controller tries to respond with a type 20 broadcast back through the RAS gateway to the client. By default, the RAS member server will not forward type 20 Packets (14h) back to the client unless two-way broadcasting of type 20 packets (NetBIOS over IPX) is enabled on the RAS member server.
RESOLUTION
To enable two-way broadcasting of NetBIOS over IPX through a RAS gateway, change the data value in the registry on the RAS server.
WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall Windows 95. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.
For information about how to edit the registry, view the Changing Keys and Values online Help topic in Registry Editor (Regedit.exe). Note that you should make a backup copy of the registry files (System.dat and User.dat) before you edit the registry.
- Start Registry Editor (Regedt32.exe), then locate the following registry subkey in the HKEY_LOCAL_MACHINE subtree:
\System\CurrentControlSet\Services\NwlnkRip\Paramete - Select the value NetBiosRouting.
- On the Edit menu, click DWORD.
- If the system has one network adapter, change the data value from 2 to 6. Or, if the system has multiple network adapters and you are already forwarding between LANs, change the data value from 3 to 7.
This is a 3-bit FLAG field set depending on whether you have multiple network adapters and/or RAS. The following is a list of the data values you can use for NetBiosRouting:
- 0 = Do not forward broadcasts. (This is the default, to reduce network traffic.)
- 1 = Forward NetBIOS packets from the LAN to LAN.
- 2 = Forward NetBIOS packets from the remote client to the LAN (WAN to LAN).
- 4 = Forward NetBIOS packets from the LAN to the remote client (LAN to WAN).
- Click OK, and then quit Registry Editor.
- Shut down and restart Windows NT Server.
NOTE: Forwarding 14h packets significantly increases network and RAS traffic. It is more efficient to enable the NetBEUI protocol over the RAS connection (RAS Server + PDC) than to enable two-way broadcasting of type 20 (14h) packets.
For additional information, see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: 148693
TITLE : IPX RAS Clients Unable to View or Access NetBIOS Resources
Keywords: kbprb KB173607
