Microsoft KB Archive/173031: Difference between revisions

From BetaArchive Wiki
(importing KB archive)
 
m (X010 moved page Microsoft KB Archive/Q173031 to Microsoft KB Archive/173031 without leaving a redirect: Text replacement - "Microsoft KB Archive/Q" to "Microsoft KB Archive/")
 
(No difference)

Latest revision as of 18:17, 12 August 2020

PRB: Error Message “No model selected”

PSS ID Number: Q173031 Article last modified on 08-26-1997

IRIX:3.51,3.7; WINDOWS NT:3.51,3.7

IRIX NT WINDOWS

======================================================================

The information in this article applies to:

  • Softimage 3D for IRIX, versions 3.51, 3.7
  • == Softimage 3D for Windows NT, versions 3.51, 3.7 ==

SYMPTOMS

When you try to save a curve deformation keyframe the following error message appears:

No model selected or model doesn’t have spline fitting

CAUSE

  • Your model may not be selected.
  • When you saved a keyframe you did not select the correct type of keyframe; you saved a Node Curve Deformation (NCD) keyframe on an object that should have been saved as a Branch Curve Deformation (BCD)… or the inverse.

RESOLUTION

  • Verify that your model is selected and that you have applied a curve deformation.
  • In the Schematic view, if your object is a single element, verify that NCD appears above its name. If your object is in a hierarchy, verify that BCD appears above its name.

STATUS

This behavior is by design.

REFERENCES

If you have any questions concerning the information contained in this article, contact support@softimage.com by e-mail.

Additional query words: si si3d si3dmod

Keywords : kberrmsg kbgraphic Version : IRIX:3.51,3.7; WINDOWS NT:3.51,3.7 Platform : IRIX NT WINDOWS Issue type : kbprb ============================================================================= Copyright Microsoft Corporation 1997.