Article ID: 172983
Article Last Modified on 12/5/2003
APPLIES TO
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Workstation 4.0 Developer Edition
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
- Microsoft Windows NT Server 4.0 Standard Edition
- Microsoft TCP/IP for Windows for Workgroups 3.11
- Microsoft Windows 95
This article was previously published under Q172983
SUMMARY
This article is intended for audiences who are familiar with Transmission Control Protocol/Internet Protocol (TCP/IP) and discusses the process of the TCP three-way handshake that occurs between a client and server when initiating or terminating a TCP connection.
For additional information on TCP/IP, please see the following white paper available on the Microsoft anonymous ftp server:
File Name: Tcpipimp2.doc
Location : ftp://ftp.microsoft.com/bussys/winnt/winnt-docs/papers/ "Microsoft Windows NT 3.5/3.51/4.0: TCP/IP Implementation Details TCP/IP Protocol Stack and Services, Version 2.0"
MORE INFORMATION
The Transmission Control Protocol (TCP) level of the TCP/IP transport protocol is connection-oriented. Connection-oriented means that, before any data can be transmitted, a reliable connection must be obtained and acknowledged. TCP level data transmissions, connection establishment, and connection termination maintain specific control parameters that govern the entire process. The control bits are listed as follows:
URG: Urgent Pointer field significant
ACK: Acknowledgement field significant
PSH: Push Function
RST: Reset the connection
SYN: Synchronize sequence numbers
FIN: No more data from sender
There are two scenarios where a three-way handshake will take place:
- Establishing a connection (an active open)
- Terminating a connection (an active close)
The following sample information was obtained from a Network Monitor capture. Network Monitor is a protocol analyzer that can be obtained from Microsoft Systems Management Server.
Establishing a Connection
The following sequence shows the process of a TCP connection being established:
Frame 1:
As you see in the first frame, the client, NTW3, sends a SYN segment (TCP ....S.). This is a request to the server to synchronize the sequence numbers. It specifies its initial sequence number (ISN), which is incremented by 1, 8221821+1=8221822, and that is sent to the server. To initialize a connection, the client and server must synchronize each other's sequence numbers. There is also an option for the Maximum Segment Size (MSS) to be set, which is defined by the length (len: 4). This option communicates the maximum segment size the sender wants to receive. The Acknowledgement field (ack: 0) is set to zero because this is the first part of the three-way handshake.
1 2.0785 NTW3 --> BDC3 TCP ....S., len: 4, seq: 8221822-8221825, ack: 0,
win: 8192, src: 1037 dst: 139 (NBT Session) NTW3 --> BDC3 IP
TCP: ....S., len: 4, seq: 8221822-8221825, ack: 0, win: 8192, src: 1037
dst: 139 (NBT Session)
TCP: Source Port = 0x040D
TCP: Destination Port = NETBIOS Session Service
TCP: Sequence Number = 8221822 (0x7D747E)
TCP: Acknowledgement Number = 0 (0x0)
TCP: Data Offset = 24 (0x18)
TCP: Reserved = 0 (0x0000)
TCP: Flags = 0x02 : ....S.
TCP: ..0..... = No urgent data
TCP: ...0.... = Acknowledgement field not significant
TCP: ....0... = No Push function
TCP: .....0.. = No Reset
TCP: ......1. = Synchronize sequence numbers
TCP: .......0 = No Fin
TCP: Window = 8192 (0x2000)
TCP: Checksum = 0xF213
TCP: Urgent Pointer = 0 (0x0)
TCP: Options
TCP: Option Kind (Maximum Segment Size) = 2 (0x2)
TCP: Option Length = 4 (0x4)
TCP: Option Value = 1460 (0x5B4)
TCP: Frame Padding
00000: 02 60 8C 9E 18 8B 02 60 8C 3B 85 C1 08 00 45 00 .`.....`.;....E.
00010: 00 2C 0D 01 40 00 80 06 E1 4B 83 6B 02 D6 83 6B .,..@....K.k...k
00020: 02 D3 04 0D 00 8B 00 7D 74 7E 00 00 00 00 60 02 .......}t~....`.
00030: 20 00 F2 13 00 00 02 04 05 B4 20 20 .........
Frame 2:
In the second frame, the server, BDC3, sends an ACK and a SYN on this segment (TCP .A..S.). In this segment the server is acknowledging the request of the client for synchronization. At the same time, the server is also sending its request to the client for synchronization of its sequence numbers. There is one major difference in this segment. The server transmits an acknowledgement number (8221823) to the client. The acknowledgement is just proof to the client that the ACK is specific to the SYN the client initiated. The process of acknowledging the client's request allows the server to increment the client's sequence number by one and uses it as its acknowledgement number.
2 2.0786 BDC3 --> NTW3 TCP .A..S., len: 4, seq: 1109645-1109648, ack:
8221823, win: 8760, src: 139 (NBT Session) dst: 1037 BDC3 --> NTW3 IP
TCP: .A..S., len: 4, seq: 1109645-1109648, ack: 8221823, win: 8760,
src: 139 (NBT Session) dst: 1037
TCP: Source Port = NETBIOS Session Service
TCP: Destination Port = 0x040D
TCP: Sequence Number = 1109645 (0x10EE8D)
TCP: Acknowledgement Number = 8221823 (0x7D747F)
TCP: Data Offset = 24 (0x18)
TCP: Reserved = 0 (0x0000)
TCP: Flags = 0x12 : .A..S.
TCP: ..0..... = No urgent data
TCP: ...1.... = Acknowledgement field significant
TCP: ....0... = No Push function
TCP: .....0.. = No Reset
TCP: ......1. = Synchronize sequence numbers
TCP: .......0 = No Fin
TCP: Window = 8760 (0x2238)
TCP: Checksum = 0x012D
TCP: Urgent Pointer = 0 (0x0)
TCP: Options
TCP: Option Kind (Maximum Segment Size) = 2 (0x2)
TCP: Option Length = 4 (0x4)
TCP: Option Value = 1460 (0x5B4)
TCP: Frame Padding
00000: 02 60 8C 3B 85 C1 02 60 8C 9E 18 8B 08 00 45 00 .`.;...`......E.
00010: 00 2C 5B 00 40 00 80 06 93 4C 83 6B 02 D3 83 6B .,[.@....L.k...k
00020: 02 D6 00 8B 04 0D 00 10 EE 8D 00 7D 74 7F 60 12 ...........}t?`.
00030: 22 38 01 2D 00 00 02 04 05 B4 20 20 "8.-......
Frame 3:
In the third frame, the client sends an ACK on this segment (TCP .A....). In this segment, the client is acknowledging the request from the server for synchronization. The client uses the same algorithm the server implemented in providing an acknowledgement number. The client's acknowledgment of the server's request for synchronization completes the process of establishing a reliable connection, thus the three-way handshake.
3 2.787 NTW3 --> BDC3 TCP .A...., len: 0, seq: 8221823-8221823, ack:
1109646, win: 8760, src: 1037 dst: 139 (NBT Session) NTW3 --> BDC3 IP
TCP: .A...., len: 0, seq: 8221823-8221823, ack: 1109646, win: 8760,
src: 1037 dst: 139 (NBT Session)
TCP: Source Port = 0x040D
TCP: Destination Port = NETBIOS Session Service
TCP: Sequence Number = 8221823 (0x7D747F)
TCP: Acknowledgement Number = 1109646 (0x10EE8E)
TCP: Data Offset = 20 (0x14)
TCP: Reserved = 0 (0x0000)
TCP: Flags = 0x10 : .A....
TCP: ..0..... = No urgent data
TCP: ...1.... = Acknowledgement field significant
TCP: ....0... = No Push function
TCP: .....0.. = No Reset
TCP: ......0. = No Synchronize
TCP: .......0 = No Fin
TCP: Window = 8760 (0x2238)
TCP: Checksum = 0x18EA
TCP: Urgent Pointer = 0 (0x0)
TCP: Frame Padding
00000: 02 60 8C 9E 18 8B 02 60 8C 3B 85 C1 08 00 45 00 .`.....`.;....E.
00010: 00 28 0E 01 40 00 80 06 E0 4F 83 6B 02 D6 83 6B .(..@....O.k...k
00020: 02 D3 04 0D 00 8B 00 7D 74 7F 00 10 EE 8E 50 10 .......}t?....P.
00030: 22 38 18 EA 00 00 20 20 20 20 20 20 "8....
Terminating a Connection
Although the three-way handshake only requires three packets to be transmitted over our networked media, the termination of this reliable connection will necessitate the transmission of four packets. Because a TCP connection is full duplex (that is, data can be flowing in each direction independent of the other), each direction must be terminated independently.
Frame 4:
In this session of frames, you see the client sending a FIN that is accompanied by an ACK (TCP .A...F). This segment has two basic functions. First, when the FIN parameter is set, it will inform the server that it has no more data to send. Second, the ACK is essential in identifying the specific connection they have established.
4 16.0279 NTW3 --> BDC3 TCP .A...F, len: 0, seq: 8221823-8221823,
ack:3462835714, win: 8760, src: 2337 dst: 139 (NBT Session) NTW3 --> BDC3
IP
TCP: .A...F, len: 0, seq: 8221823-8221823, ack: 1109646, win: 8760, src:
1037 dst: 139 (NBT Session)
TCP: Source Port = 0x040D
TCP: Destination Port = NETBIOS Session Service
TCP: Sequence Number = 8221823 (0x7D747F)
TCP: Acknowledgement Number = 1109646 (0x10EE8E)
TCP: Data Offset = 20 (0x14)
TCP: Reserved = 0 (0x0000)
TCP: Flags = 0x11 : .A...F
TCP: ..0..... = No urgent data
TCP: ...1.... = Acknowledgement field significant
TCP: ....0... = No Push function
TCP: .....0.. = No Reset
TCP: ......0. = No Synchronize
TCP: .......1 = No more data from sender
TCP: Window = 8760 (0x2238)
TCP: Checksum = 0x236C
TCP: Urgent Pointer = 0 (0x0)
00000: 00 20 AF 47 93 58 00 A0 C9 22 F5 39 08 00 45 00 . .G.X...".9..E.
00010: 00 28 9B F5 40 00 80 06 21 4A C0 5E DE 7B C0 5E .(..@...!J.^.{.^
00020: DE 57 09 21 05 48 0B 20 96 AC CE 66 AE 02 50 11 .W.!.H. ...f..P.
00030: 22 38 23 6C 00 00 "8#l..
Frame 5:
In this frame, you do not see anything special except for the server acknowledging the FIN that was transmitted from the client.
5 16.0281 BDC3 --> NTW3 TCP .A...., len: 0, seq: 1109646-1109646,
ack: 8221824, win:28672, src: 139 dst: 2337 (NBT Session) BDC3 --> NTW3
IP
TCP: .A...., len: 0, seq: 1109646-1109646, ack: 8221824, win:28672, src:
139 dst: 2337 (NBT Session)
TCP: Source Port = 0x040D
TCP: Destination Port = NETBIOS Session Service
TCP: Sequence Number = 1109646 (0x10EE8E)
TCP: Acknowledgement Number = 8221824 (0x7D7480)
TCP: Data Offset = 20 (0x14)
TCP: Reserved = 0 (0x0000)
TCP: Flags = 0x10 : .A....
TCP: ..0..... = No urgent data
TCP: ...1.... = Acknowledgement field significant
TCP: ....0... = No Push function
TCP: .....0.. = No Reset
TCP: ......0. = No Synchronize
TCP: .......0 = No Fin
TCP: Window = 28672 (0x7000)
TCP: Checksum = 0xD5A3
TCP: Urgent Pointer = 0 (0x0)
TCP: Frame Padding
00000: 00 A0 C9 22 F5 39 08 00 02 03 BA 84 08 00 45 00 ...".9........E.
00010: 00 28 D2 82 00 00 3F 06 6B BD C0 5E DE 57 C0 5E .(....?.k..^.W.^
00020: DE 7B 05 48 09 21 CE 66 AE 02 0B 20 96 AD 50 10 .{.H.!.f... ..P.
00030: 70 00 D5 A3 00 00 90 00 01 00 86 00 p...........
Frame 6:
After receiving the FIN from the client computer, the server will ACK. Even though TCP has established connections between the two computers, the connections are still independent of one another. Therefore, the server must also transmit a FIN (TCP .A...F) to the client.
6 17.0085 BDC3 --> NTW3 TCP .A...F, len: 0, seq: 1109646-1109646, ack:
8221824, win:28672, src: 139 dst: 2337 (NBT Session) BDC3 --> NTW3 IP
TCP: .A...F, len: 0, seq: 1109646-1109646, ack: 8221824, win:28672, src:
139 dst: 2337 (NBT Session)
TCP: Source Port = 0x0548
TCP: Destination Port = 0x0921
TCP: Sequence Number = 1109646 (0x10EE8E)
TCP: Acknowledgement Number = 8221824 (0x7D7480)
TCP: Data Offset = 20 (0x14)
TCP: Reserved = 0 (0x0000)
TCP: Flags = 0x11 : .A...F
TCP: ..0..... = No urgent data
TCP: ...1.... = Acknowledgement field significant
TCP: ....0... = No Push function
TCP: .....0.. = No Reset
TCP: ......0. = No Synchronize
TCP: .......1 = No more data from sender
TCP: Window = 28672 (0x7000)
TCP: Checksum = 0xD5A2
TCP: Urgent Pointer = 0 (0x0)
TCP: Frame Padding
00000: 00 A0 C9 22 F5 39 08 00 02 03 BA 84 08 00 45 00 ...".9........E.
00010: 00 28 D2 94 00 00 3F 06 6B AB C0 5E DE 57 C0 5E .(....?.k..^.W.^
00020: DE 7B 05 48 09 21 CE 66 AE 02 0B 20 96 AD 50 11 .{.H.!.f... ..P.
00030: 70 00 D5 A2 00 00 02 04 05 B4 86 00 p...........
Frame 7:
The client responds in the same format as the server, by ACKing the server's FIN and incrementing the sequence number by 1.
7 17.0085 NTW3 --> BDC3 TCP .A...., len: 0, seq: 8221824-8221824, ack:
1109647, win: 8760, src: 2337 dst: 139 (NBT Session) NTW3 --> BDC3 IP
TCP: .A...., len: 0, seq: 8221824-8221824, ack: 1109647, win: 8760, src:
2337 dst: 139 (NBT Session)
TCP: Source Port = 0x0921
TCP: Destination Port = 0x0548
TCP: Sequence Number = 8221824 (0x7D7480)
TCP: Acknowledgement Number = 1109647 (0x10EE8F)
TCP: Data Offset = 20 (0x14)
TCP: Reserved = 0 (0x0000)
TCP: Flags = 0x10 : .A....
TCP: ..0..... = No urgent data
TCP: ...1.... = Acknowledgement field significant
TCP: ....0... = No Push function
TCP: .....0.. = No Reset
TCP: ......0. = No Synchronize
TCP: .......0 = No Fin
TCP: Window = 8760 (0x2238)
TCP: Checksum = 0x236B
TCP: Urgent Pointer = 0 (0x0)
00000: 00 20 AF 47 93 58 00 A0 C9 22 F5 39 08 00 45 00 . .G.X...".9..E.
00010: 00 28 BA F5 40 00 80 06 02 4A C0 5E DE 7B C0 5E .(..@....J.^.{.^
00020: DE 57 09 21 05 48 0B 20 96 AD CE 66 AE 03 50 10 .W.!.H. ...f..P.
00030: 22 38 23 6B 00 00 "8#k..
The client ACKing the FIN notification from the server identifies a graceful close of a TCP connection.
REFERENCES
For additional information on ICMP:
Please see the following article in the Microsoft Knowledge Base:
170292 Internet Control Message Protocol (ICMP) Basics
-or-
Obtain RFC 793.
RFCs may be obtained through the Internet as follows:
Paper copies of all RFCs are available from the NIC, either individually or on a subscription basis (for more information contact NIC@NIC.DDN.MIL). Online copies are available through FTP or Kermit from NIC.DDN.MIL as rfc/rfc####.txt or rfc/rfc####.PS (#### is the RFC number without leading zeros).
Keywords: kbinfo kbnetwork KB172983
