Microsoft KB Archive/170154

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 19:31, 20 July 2020 by X010 (talk | contribs) (Text replacement - ">" to ">")

Article ID: 170154

Article Last Modified on 5/13/2003



APPLIES TO

  • Microsoft Visual Basic 6.0 Learning Edition
  • Microsoft Visual Basic 6.0 Professional Edition
  • Microsoft Visual Basic 6.0 Enterprise Edition



This article was previously published under Q170154

SUMMARY

The information below includes the documentation and workarounds for Visual Basic 6.0. This information can also be found in the README.htm file that ships with Visual Basic 6.0 on the Visual Basic 6.0 CD-ROM. Please see the REFERENCES section of this article for a list of the Microsoft Knowledge Base articles relating to the Visual Basic 6.0 readme.

Following is a list of all parts of the readme file:

Part 1.  Important Issues - Please Read First!
Part 2.  Data Access Issues and DataBinding Tips
Part 3.  Control Issues
Part 4.  Language Issues
Part 5.  Samples Issues
Part 6.  Wizard Issues
Part 7.  Error Message Issues
Part 8.  WebClass Designer Issues
Part 9.  DHTML Page Designer Issues
Part 10. Extensibility issues
Part 11. Miscellaneous Issues
Part 12. Microsoft Transaction Server (MTS) Issues
Part 13. Dictionary Object
Part 14. Visual Component Manager
Part 15. Application Performance Manager
                

MORE INFORMATION

"Command-Line Safe" Add-In Behavior

You can use the Load Behavior box in the Add-In Manager to control how and when an add-in loads in Visual Basic:

  • Loaded/Unloaded -- either loads or unloads a selected add-in when the box is checked or unchecked.
  • Load On Startup -- indicates whether the selected add-in should load when the Visual Basic IDE is started.
  • Command Line -- indicates whether an add-in should load when Visual Basic is started from a command line, either through a DOS prompt or a script.

When you select Command Line load behavior for an add-in, you may get the following warning message:

"The selected add-in has not been confirmed to be 'command-line safe', and may require some user intervention (possible UI). Do you wish to proceed?"


This occurs when you select an add-in for Command Line load behavior that was not declared by the author of the add-in to be "command line safe" when it was created. (This can be indicated with the Add-In Designer through a checkbox.)

"Command-line safe" means that the add-in is registered in a way to indicate that it contains no user interfaces that require user input when Visual Basic is invoked through a command-line. A user interface can interfere with the operation of unattended processes (such as build scripts).

If you don't indicate that an add-in is command-line safe (even if it is command-line safe), when a user selects your add-in and then Command Line in the Load Behavior box, they'll receive the warning message. This isn't a serious problem, but merely a warning to the user that the selected add-in might possibly contain UI elements that can pop up unexpectedly and halt their automated scripts by pausing for user input.

Manually Setting Add-In Registry Values

You can also manually set the command-line safe flag (as well as the other values) for an add-in through the Windows registry.

NOTE: You should not attempt to directly manipulate any Windows registry entries unless you are familiar with doing so. Setting an invalid registry entry can cause problems with Windows, even preventing you from being able to load Windows.

In Visual Basic 6.0, the key that holds add-in information is located in: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Visual Basic\6.0\Addins\<add- in.name>.

For Visual Basic 6.0, the LoadBehavior DWord values are:

  • None = 0
  • Startup = 1
  • Command Line = 4
  • Command Line / Startup = 5

There is also an additional DWord value that indicates whether the add-in is command-line safe: CommandLineSafe. A value of 1 indicates the add-in is command-line safe, while a value of 0 (the default) indicates that it is not command-line safe. A value of 0 is implied if you forget to check the command-line safe box in the Add-In Designer since the default value of 0 is assumed, and the add-in isn't considered command-line safe.

So, to demonstrate how to use these values to indicate that a fictitious add-in (My.Addin) is command-line safe and to have it load when Visual Basic is started by command-line, you would set the following registry values, using a tool such as RegEdit:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Visual Basic\6.0\Addins\My.Addin

   "FriendlyName"="A friendly name for your add-in"
   "Description"="This value describes the add-in"
   "LoadBehavior"=dword:4
   "CommandLineSafe"=dword:1
                


Using the Add-In Designer

Visual Basic 6.0 includes a new tool, called the Add-In designer, to aid you in creating add-ins. To open it:

  • Create a new add-in project.
  • In the Project Explorer, under Designers, is a designer called Connect. Double-click it to activate the Add-In designer.

Unfortunately, context-sensitive help currently isn't available for the Add- In designer. Help topics are available, however. You can find the appropriate topics by searching for Add-In Designer in the MSDN index. You should see a list of three associated topics:

  • "Using the Add-In Designer"
  • "General Tab (Add-In Designer)"
  • "Advanced Tab (Add-In Designer)"

For more information, search online, with Search titles only selected, for "Registering Add-Ins" in the MSDN Library Visual Studio 6.0 documentation.

Add-In Designer: More Information About Specifying Satellite DLL

When creating an add-in with the Add-In designer, you can specify a DLL on the Advanced tab. Be sure, however, to type only the name of the DLL file, and not its fully-qualified path. For example:

MyAddinName.DLL



not:

Addins\MyAddinName\MyAddinName.DLL



Localized Satellite DLLs

If you create a localized satellite DLL, you should also create a resources directory and a locale ID directory for the satellite DLL and install the DLL in the appropriate directory. The schematic for such a path is:

<AddIn Directory>\Resources\<Locale ID>\<MySatellite.DLL>



For example, a satellite DLL for the German version (Locale ID = 1031) would go into the directory:

C:\Program Files\MyAddin\Resources\1031\MyAddinName.DLL


REFERENCES

For additional information, please see the following articles in the Microsoft Knowledge Base:

170164 : INFO: VB 6.0 Readme Part 1: Important Issues - Read First!

170163 : INFO: VB 6.0 Readme Part 2: Data Access/Databinding Issues

170162 : INFO: VB 6.0 Readme Part 3: Control Issues

170161 : INFO: VB 6.0 Readme Part 4: Language Issues

170160 : INFO: VB 6.0 Readme Part 5: Samples Issues

190046 : INFO: VB 6.0 Readme Part 6: Wizard Issues

170158 : INFO: VB 6.0 Readme Part 7: Error Message Issues

189539 : INFO: VB 6.0 Readme Part 8: WebClass Designer Issues

190249 : INFO: VB 6.0 Readme Part 9: DHTML Page Designer Issues

170154 : INFO: VB 6.0 Readme Part 10: Extensibility Issues

170157 : INFO: VB 6.0 Readme Part 11: Miscellaneous Issues

170156 : INFO: VB 6.0 Readme Part 12: Transaction Server (MTS) Issues

191792 : INFO: VB 6.0 Readme Part 13: Dictionary Object

191791 : INFO: VB 6.0 Readme Part 14: Visual Component Manager

191790 : INFO: VB 6.0 Readme Part 15: Application Performance Explorer


Keywords: kbinfo kbregistry kbaddin kbreadme KB170154