Microsoft KB Archive/168653

Knowledge Base

Unable to Connect to NetWare Server Using RConsole

Article ID: 168653

Article Last Modified on 11/1/2006

---

APPLIES TO

• Microsoft Windows NT Server 4.0 Standard Edition
• Microsoft Windows NT Workstation 4.0 Developer Edition

---

This article was previously published under Q168653

SYMPTOMS

When you are running RConsole to connect to a Novell NetWare server using the SPX connection type, you may be unable to obtain a list of servers or connect to a server. RConsole may report the following error messages:

SPXEstablishConnection failed to establish a connection to the desired server.

The server connection was terminated by AllocateConnection.

A connection could not be established with the selected server.

CAUSE

When you are using locally administered network addresses on an Ethernet network, the hardware MAC address of the NetWare server's network adapter has eight or more trailing zeroes.

RESOLUTION

Modify the "NODE=xxxxxxxxxxxx" setting on the NetWare server so that the last eight numbers are not all zeroes.

For information about how to change the "NODE=xxxxxxxxxxxx" setting on a NetWare server, see the software documentation or contact the manufacturer.

MORE INFORMATION

The third-party product discussed in this article is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

Keywords: kb3rdparty kberrmsg kbnetwork KB168653

---

Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.