Microsoft KB Archive/168652

IPCONFIG Does Not Display NetBIOS Scope ID Last reviewed: August 6, 1997 Article ID: Q168652

---

The information in this article applies to: Microsoft Windows NT Workstation versions 3.5, 3.51, and 4.0 Microsoft Windows NT Server versions 3.5, 3.51, and 4.0 SYMPTOMS When you run ipconfig.exe /all, the entry for NetBIOS Scope ID is blank, even though you have a NetBIOS scope ID configured in your TCP/IP properties. RESOLUTION To see the NetBIOS Scope ID that is configured for your computer, you can do one of the following: View it in the TCP/IP properties in Network Control Panel applet -OR- Execute nbtstat -n STATUS Microsoft has confirmed this to be a problem in Windows NT version 3.5x and 4.0. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available. Keywords  : kbbug3.50 kbbug3.51 kbbug4.00 NTSrvWkst nttcp kbnetwork Version  : WinNT:3.5,3.51,4.0 Platform  : winnt Issue type  : kbbug

---

================================================================================ THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: August 6, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.