Microsoft KB Archive/166961

From BetaArchive Wiki
Knowledge Base


How To FTP with CERN-Based Proxy Using WinInet API

Article ID: 166961

Article Last Modified on 7/1/2004



APPLIES TO

  • Microsoft Internet Explorer 3.0, when used with:
    • Microsoft Windows NT 4.0
    • Microsoft Windows 95
  • Microsoft Windows Internet Services (WinInet)



This article was previously published under Q166961

SUMMARY

A CERN-based Web proxy server uses HTTP for all communications with its clients. Therefore the FTP set of Wininet functions cannot be used to download resources on a FTP server if the FTP server is accessed through a CERN-based proxy on the client behalf. Instead, the client has to use general Wininet functions such as InternetOpenUrl and InternetReadFile to properly retrieve the data from the HTTP stream sent from the CERN-based proxy server.

MORE INFORMATION

CERN-compatible proxy services support HTTP (WWW), FTP, and Gopher requests. But the communication between the CERN-based proxy server and its clients uses HTTP only. The following diagram show how a FTP request is forwarded using a CERN-compatible proxy service:

   Get ftp://host.com/root/test.doc HTTP 1.0        FTP Request
   |=========|                 |=============|          |=============|
   |         |---------------->| Cern-based  |--------->|             |
   | Client  |    HTTP         | Proxy Server|   FTP    |  Ftp Server |
   |         |<----------------|             |<---------|             |
   |=========|                 |=============|          |=============|
         HTTP/1.0 200 <document>                  FTP Response
                

Since a CERN-based proxy server communicates with its clients in HTTP, you cannot use the FTP set of Wininet functions if the client accesses the FTP server through the proxy server. Instead, you should use InternetOpenUrl and InternetReadFile to retrieve the requested data from the HTTP stream sent by the proxy server.

If the FTP URL passed in InternetOpenUrl is a URL to a file on the FTP server, you can use InternetReadFile to read the entire file content. If the FTP URL passed in InternetOpenUrl is a URL to a directory on the FTP server, InternetReadFile retrieves a directory listing of the FTP URL as a HTML document. In both cases you may have to loop calling InternetReadFile until all data in the HTTP stream are read.

If the client intends to retrieve anything further below the FTP directory URL, it has to parse the HTML document to get URLs to sub-directories or files and issue more InternetOpenUrl and InternetReadFile calls. Also when a CERN-based proxy is used, the INTERNET_FLAG_RAW_DATA flag should not be specified in the InternetOpenUrl call.

The following pseudo code demonstrates how to call InternetOpenUrl and InternetReadFile when a CERN-based proxy server is used to access an FTP server:

   CHAR strURL[]="ftp://host.com/root/test.doc";
   HANDLE f;  //local file handle
   HINTERNET hInternetFile;
   DWORD dwRead, dwWritten;
   CHAR szTemp[1024];
   hInternetFile = InternetOpenUrl(hInternetSession,(LPCTSTR)strURL, NULL,
     0,INTERNET_FLAG_RELOAD | INTERNET_FLAG_DONT_CACHE, 0);
   if (hInternetFile == NULL) { do some error processing; quit; }
   //download the file to c:\deleteme
   f = CreateFile("c:\\deleteme", GENERIC_WRITE,  0, NULL,
     CREATE_ALWAYS,FILE_ATTRIBUTE_NORMAL, NULL);
   if (f ==  INVALID_HANDLE_VALUE)
   {
     do some error processing; quit;
   }

   while (InternetReadFile(hInternetFile, (LPVOID)szTemp, 1024, &dwRead))
   {
     if (!dwRead) break;
     WriteFile(f, (LPVOID)szTemp, dwRead, &dwWritten, NULL);
   }
   CloseHandle(f);
   //if the strURL is a URL to a file on the ftp server, we get the file
   //and store it in c:\deleteme.
   //if the strURL is a URL to a directory on the ftp server, c:\deleteme
   //will be a HTML page of the directory listing. You will have to parse
   //the html page, and construct new URLs, and call the above code again.
                

When the client has direct connection to a FTP server, or is connected to the FTP server via a TIS FTP proxy server, the communication to and from the client is in FTP. The client can specify the INTERNET_FLAG_RAW_DATA flag in InternetOpenUrl and then use InternetFindNextFile to get a WIN32_FIND_DATA structure and enumerate all subdirectories and files of the URL. The client can also use the FTP set of Wininet functions in such situations.

The following pseudo code demonstrates how to call InternetOpenUrl and InternetReadFile when the INTERNET_FLAG_RAW_DATA flag is specified in the InternetOpenUrl call:

   CHAR strURL[]="ftp://host.com/root/test.doc";
   WIN32_FIND_DATA wfd;
   HINTERNET hInternetFind;
   CHAR *strFileName, *strDirectoryName;

   hInternetFind = InternetOpenUrl(hInternetSession,(LPCTSTR)strURL,
                    NULL, 0, INTERNET_FLAG_RAW_DATA| INTERNET_FLAG_RELOAD |
     INTERNET_FLAG_DONT_CACHE, 0);
   if (hInternetFind ==NULL) {do some error processing; quit}
   if (!InternetFindNextFile (hInternetFind, &wfd))
   {do some error processing; quit}
   do
   {
     if(wfd.dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY)
     {
       strDirectoryName = (LPCTSTR) &wfd.cFileName;
       if (strDirectoryName[0] == ".")
         continue;
       //store the directory name and construct a URL
       //to this directory so that we can use the same
       //code to enumerate it later;
     }
     else
     {
       strFileName = (LPCTSTR) &wfd.cFileName;
       //store the file name somewhere to get it later
       //or you can get the file right here using the code
       //similar to the pseudo code in the above section
       //for CERN Proxy access;
     }
   }
   while (InternetFindNextFile (hInternetFind, &wfd));
   InternetCloseHandle(hInternetFind);
                

When the connection between the client and the FTP server is direct or via a TIS FTP proxy, InternetOpenUrl and InternetReadFile are actually generating FTP traffic rather than HTTP traffic.

The above discussion regarding using Wininet APIs with CERN-based proxy applies to GOPHER as well. Also it is important to note that Wininet APIs support HTTP, HTTPS, FTP and GOPHER URLs only. For FILE URLs such as file://server/share/file or file://\\server\share\file, you need to use Win32 APIs such as FileCopy to download the file to the client machine, or FindFirstFile, FindNextFile, and FindClose to enumerate a directory.

Keywords: kbhowto KB166961