Microsoft KB Archive/111796

WG0988: IBMTOK.386 Corrects Problems with Exiting WFWG Last reviewed: May 1, 1997 Article ID: Q111796

3.11 WINDOWS kbappnote kbfile kbother The information in this article applies to: Microsoft Windows for Workgroups version 3.11 Microsoft has an Application Note, "WG0988: IBMTOK.386 Corrects Problems with Exiting Windows for Workgroups." The WG0988 disk included with this Application Note contains a new IBMTOK.386 driver that corrects the following problems: A stack overflow error message occurs when you exit Windows for Workgroups. Your system stops responding (hangs) when you exit Windows for Workgroups. You can obtain this Application Note from the following sources: Microsoft's World Wide Web Site on the Internet The Internet (Microsoft anonymous ftp server) Microsoft Download Service (MSDL) Microsoft Product Support Services For complete information, see the "To Obtain This Application Note" section at the end of this article. THE TEXT OF WG0988 Microsoft(R) Product Support Services Application Note (Text File) WG0988: IBMTOK.386 CORRECTS PROBLEMS WITH EXITING WINDOWS FOR WORKGROUPS Revision Date: 2/94 1 Disk Included The following information applies to Microsoft Windows for Workgroups, version 3.11. | INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY | | ACCOMPANY THIS DOCUMENT (collectively referred to as an Application| | Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER | | EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED | | WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR | | PURPOSE. The user assumes the entire risk as to the accuracy and | | the use of this Application Note. This Application Note may be | | copied and distributed subject to the following conditions: 1) All| | text must be copied without modification and all pages must be | | included; 2) If software is included, all files on the disk(s) | | must be copied without modification (the MS-DOS(R) utility | | diskcopy is appropriate for this purpose); 3) All components of | | this Application Note must be distributed together; and 4) This | | Application Note may not be distributed for profit. | | | | Copyright (C) 1994 Microsoft Corporation. All Rights Reserved. | | Microsoft and MS-DOS are registered trademarks and Windows is a | | trademark of Microsoft Corporation. | | IBM is a registered trademark of International Business Machines | | Corporation. | Introduction When you use the Windows for Workgroups version 3.11 IBMTOK.386 driver, you may experience the following problems: A stack overflow error message occurs when you exit Windows for Workgroups. Your system stops responding (hangs) when you exit Windows for Workgroups. The WG0988 disk included with this Application Note contains a new IBMTOK.386 driver to correct these problems. The new driver allows the MCA IBM(R) token ring card to correctly disengage from the network ring when the network interface card (NIC) is set for IRQ 2. To install the new IBMTOK.386 file Quit Windows for Workgroups. Make a backup copy of the currently installed IBMTOK.386 file by typing the following at the MS-DOS command prompt and then pressing ENTER ren <drive>:<path>\ibmtok.386 ibmtok.old where <drive>:<path> is the location of your Windows SYSTEM subdirectory. For example, if your Windows directory is called WINDOWS and is on drive C, type the following at the MS-DOS command prompt and then press ENTER: ren c:\windows\system\ibmtok.386 ibmtok.old Insert the enclosed WG0988 disk in the appropriate floppy disk drive. To copy the file to the Windows SYSTEM subdirectory, type the following at the MS-DOS command prompt and then press ENTER copy <drive>:\ibmtok.386 <destination> where <drive> is the floppy disk drive containing the WG0988 disk and <destination> is the drive and directory of your Windows SYSTEM subdirectory. For example, if the WG0988 disk is in drive A and your Windows directory is called WINDOWS and is on drive C, type the following at the MS-DOS command prompt and then press ENTER: copy a:\ibmtok.386 c:\windows\system STATUS Microsoft has confirmed this to be a problem in Microsoft Windows for Workgroups version 3.11. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available. TO OBTAIN THIS APPLICATION NOTE You can find WG0988.EXE (size: 31790 bytes) , a self-extracting file, on the following services: Microsoft's World Wide Web Site on the Internet On the www.microsoft.com home page, click the Support icon. Click Knowledge Base, and select the product. Enter kbfile WG0988.EXE (size: 31790 bytes) , and click GO! Open the article, and click the button to download the file. Internet (anonymous FTP) ftp ftp.microsoft.com Change to the Softlib/Mslfiles folder. Get WG0988.EXE (size: 31790 bytes) Microsoft Download Service (MSDL) Dial (425) 936-6735 to connect to MSDL Download WG0988.EXE (size: 31790 bytes) For additional information about downloading, please see the following article in the Microsoft Knowledge Base: ARTICLE-ID: Q119591 TITLE  : How to Obtain Microsoft Support Files from Online Services If you are unable to access the source(s) listed above, you can have this Application Note mailed to you by calling Microsoft Product Support Services Monday through Friday, 6:00 A.M. to 6:00 P.M. Pacific time at (425) 637-7098. If you are outside the United States, contact the Microsoft subsidiary for your area.

KBCategory: kbappnote kbother kbfile KBSubcategory: wfw wfwg Additional reference words: appnote 3.1 3.10 WFWG hang Keywords : wfw wfwg kbappnote kbfile kbother Version : 3.11 Platform : WINDOWS Last reviewed: May 1, 1997 © 1998 Microsoft Corporation. All rights reserved. Terms of Use.