Microsoft KB Archive/108152

From BetaArchive Wiki
Knowledge Base


32-Bit File Access and Stacker 3.1 Utilities

Article ID: 108152

Article Last Modified on 10/28/1999



APPLIES TO

  • Microsoft Windows for Workgroups 3.11



This article was previously published under Q108152


SYMPTOMS

  • The utilities that STAC Electronics Stacker 3.1 installs in Windows for Workgroups 3.11 File Manager do not work when 32-bit file access is enabled.


-or-

  • When you are using Stacker version 4.0, you cannot use 32-bit file access on any compressed drive.

NOTE: 32-bit disk access is still available on any compressed or uncompressed drive.

WORKAROUND

To work around this problem with Stacker 3.1, disable 32-bit file access while you are using the utilities. To do this, choose the 386 Enhanced icon in Control Panel, choose the Virtual Memory button, choose Change, and then clear the 32-Bit File Access check box. You can restore 32-bit file access when you are finished using the utilities without causing any damage to the disk.

If you are using Stacker version 4.0, you can work around this problem by obtaining a file that enables the use of 32-bit file access on Stacker- compressed drives. This self-extracting file (S32BFA.EXE) is available on the STAC Electronics bulletin board service (BBS). Although this file has been tested by STAC Electronics, as of 8/29/94, the beta test is not yet complete. S32BFA.EXE can be downloaded from LIB:1 in the STAC forum on the STAC Electronics BBS. For more information, contact STAC Electronics.

STAC Electronics also suggests that you can work around this problem by loading SMARTDrive from your AUTOEXEC.BAT file. You can use the 386 Enhanced icon in Control Panel to set up a swap file and 32-bit file access for any uncompressed drive. Stacker adds an icon called Virtual Memory to Control Panel. You can set up a swap file on any drive and enable 32-bit disk access with this icon.

Stacker 3.1 adds the following menu to File Manager:

   Stacker
   -------

   File Info
   Disk Info
                

If you try to choose one of these menu items, the following error message is displayed:

Stacker not installed

The Stacker volume file still functions properly with 32-bit file access enabled, and all files are available normally.


Additional query words: 3.11 UPDATE.EXE Stackometer Stacker File Manager "Stacker not installed" "Error calculating fragmentation" stac compression VFAT stackvol

Keywords: KB108152