Microsoft KB Archive/108035

From BetaArchive Wiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Knowledge Base


WFWG Err Msg: Your Network Adapter MS$AE1 Is Not Working...

Article ID: 108035

Article Last Modified on 10/27/1999



APPLIES TO

  • Microsoft Windows for Workgroups 3.11



This article was previously published under Q108035

SYMPTOMS

If an Artisoft AE/1 or AE/2 card network interface card (NIC) is configured for IRQ 10 or 15, it does not work with the NE1000.386 NDIS 3 NIC driver that ships with Microsoft Windows for Workgroups 3.11. In this situation, the following error message appears when you load Windows for Workgroups 3.11:

Your network adapter MS$AE1 is not working properly. You may need to set it up again.

CAUSE

The NE1000.386 NDIS 3 NIC driver that ships with Windows for Workgroups 3.11 does not support extended IRQs. This is because the Novell NE1000 card, for which the driver was written, does not support extended IRQs. Therefore, NICs that emulate the NE1000 and support IRQ 10 or 15, such as the Artisoft AE/1 or AE/2 adapter, do not work with the Windows for Workgroups 3.11 NDIS 3 driver when set to these IRQs.

WORKAROUND

To work around this problem, do one of the following:

  • Use IRQ 2, 3, 4, 5, or 7.


-or-

  • Use the NDIS 2 driver, which does support extended IRQs.



Additional query words: 3.11 won't work incompatible interrupts ae-1 ae1 ae/1 ae1000 ae-1000 ae-2 ae/2 ae2

Keywords: KB108035