Microsoft KB Archive/107778

From BetaArchive Wiki

Mac Works 3.0: Printing Envelopes to Hewlett-Packard 4M

PSS ID Number: Q107778 Article last modified on 10-22-1998

3.0

MACINTOSH

====================================================================== 3.00 MACINTOSH kbprint

The information in this article applies to:
- Microsoft Works for the Macintosh, version 3.0

SUMMARY

This article explains how to print envelopes from a Microsoft Works 3.0 database to a Hewlett-Packard (HP) 4M printer. Depending on the driver you use, the steps will differ slightly. The drivers listed here are the Apple LaserWriter 7.x or 8.x driver and the Hewlett-Packard 4M driver version 2.2.

MORE INFORMATION

Apple LaserWriter Driver

If you are using an Apple LaserWriter driver:

  1. Open the Database file from which you want to print envelopes.

  2. From the Form menu, choose New Form.

  3. In the Standard Sizes field, choose Envelope.

  4. From the list of envelope sizes, choose #10 Legal Envelope.

  5. Choose the Fields button on the right side of the New/Set Up Form dialog box.

  6. In the Auto Place Fields dialog box, select each field that you want to use in the address on the envelope, and choose the Place button. As you do this for each desired field, a check mark appears next to the selected field name. When you have selected all the fields you want to use in your address, choose OK. You must then arrange the fields on the form as you want them to appear.

  7. From the File menu, choose Page Setup.

  8. In Page Setup, choose US Letter.

  9. Under Orientation, choose Landscape.

  10. Choose the Document button, and change the Margins to the following:

    Top: 4.5 Bottom 0.25 Left: .5 Right: 1.00

    In the Print dialog box, choose Manual Feed.

    If you receive alerts that the margins are negative or too small, ignore the alerts and continue with the printing.

    If the labels do not initially print in the correct location on the envelope, switch to design view and move the fields.

Hewlett-Packard 4M Driver

If you are using the Hewlett-Packard 4M driver:

  1. Open the Database file from which you want to print envelopes.

  2. From the Form menu, choose New Form.

  3. In the Standard Sizes field, choose Envelope.

  4. From the list of envelope sizes, choose #10 Legal Envelope.

  5. Choose the Fields button on the right side of the New/Set Up Form dialog box.

  6. In the Auto Place Fields dialog box, select each field that you want to use in the address on the envelope, and choose the Place button. As you do this for each desired field, a check mark appears next to the selected field name. When you have selected all the fields you want to use in your address, choose the OK button. You must then arrange the fields on the form as you want them to appear.

  7. From the File menu, choose Page Setup.

  8. Under Envelope, choose Commercial 10.

  9. Under Orientation, choose Landscape.

  10. Click the Document button, and change the Margins to the following:

    Top: 0.25 Left: 2.00 Right: 1.00 Bottom: 1.00

    If you receive alerts that the margins are negative or too small, ignore the alerts and continue with the printing.

  11. From the File menu, choose Print. Under Source, choose Manual Feed and prepare to feed your envelopes.

KBCategory: kbprint KBSubcategory: macworkskb

Additional reference words: kbhowto 3.00 mac mwksdb

Keywords : kbprint Version : 3.0 Platform : MACINTOSH Issue type : kbhowto ============================================================================= Copyright Microsoft Corporation 1998.