Microsoft KB Archive/107577: Difference between revisions

From BetaArchive Wiki
(importing KB archive)
 
m (Text replacement - """ to """)
Line 61: Line 61:
<div class="errormessage">
<div class="errormessage">


NOTE: With Windows for Workgroups 3.1, RPRINTER could not be used successfully. According to Novell's Tech Bulletin TB.P.303, titled &quot;Microsoft Windows for Workgroups and Novell NetWare,&quot; using RPRINTER with Windows for Workgroups 3.1 would cause the machine to stop responding (hang). Novell has no solution or workaround at this time.
NOTE: With Windows for Workgroups 3.1, RPRINTER could not be used successfully. According to Novell's Tech Bulletin TB.P.303, titled "Microsoft Windows for Workgroups and Novell NetWare," using RPRINTER with Windows for Workgroups 3.1 would cause the machine to stop responding (hang). Novell has no solution or workaround at this time.


</div>
</div>

Revision as of 09:33, 20 July 2020

Knowledge Base


Article ID: 107577

Article Last Modified on 9/19/1999



APPLIES TO

  • Microsoft Windows for Workgroups 3.11



This article was previously published under Q107577

3.11
WINDOWS
kbprint kbdisplay kb3rdparty kbnetwork

This article contains information about the use of Windows for Workgroups with third-party products or configurations that have not been tested and are not supported by Microsoft.

If the steps or procedures described in this article do not function properly, contact the manufacturer of the third-party product for more information or use a supported configuration.

SUMMARY

With Windows for Workgroups 3.11, RPRINTER (or NPRINTER in Novell NetWare 4.01) can be used successfully under certain conditions. If you run the RPRINTER utility without print sharing, RPRINTER, Windows for Workgroups 3.11, and NetWare 3.x or 4.x can coexist with minimal difficulty, as long as you do not send simultaneous print jobs. Problems may occur if multiple print jobs are sent from different workstations and you are sharing printers. On larger networks, this is not realistic. The only workaround is to use Windows for Workgroups print- sharing capabilities without RPRINTER or vice versa.

NOTE: With Windows for Workgroups 3.1, RPRINTER could not be used successfully. According to Novell's Tech Bulletin TB.P.303, titled "Microsoft Windows for Workgroups and Novell NetWare," using RPRINTER with Windows for Workgroups 3.1 would cause the machine to stop responding (hang). Novell has no solution or workaround at this time.

MORE INFORMATION

Although you can use RPRINTER with Windows for Workgroups 3.11, you may encounter problems. For example, if you share a local printer that is being serviced by RPRINTER and several Windows for Workgroups workstations send multiple print jobs simultaneously to this shared printer, the following error message may appear:

<Windows File Server> is attempting to use the LPTx device which Windows is currently using. Do you want 'Windows File Server' to take control of the device?

YES or NO?

If you respond YES, the jobs queued in Print Manager should continue printing, followed by those in the NetWare queue; however, choosing YES causes the screen to turn black (and remain so after the print jobs have been completed). Pressing CTRL+ALT+DEL and then ESC may restore the video display.

Even if you don't receive this error message, print jobs may be mixed together and/or have garbled output from the two separate print queues.

NOTE: This error message may also appear if you are you use the NPRINTER file in Novell version 4.01.

REFERENCES

Novell's Tech Bulletin TB.P.303


Additional query words: 3.11 incompatible compatible LPT1 LPT2 LPT3 not supported blue screen 3rdparty

Keywords: KB107577