Microsoft KB Archive/107372

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 15:04, 18 July 2020 by 3155ffGd (talk | contribs) (importing KB archive)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Knowledge Base


Windows for Workgroups: 32-Bit File Access Is Slow with MSIPX

Article ID: 107372

Article Last Modified on 10/15/1999



APPLIES TO

  • Microsoft Windows for Workgroups 3.11



This article was previously published under Q107372

SYMPTOMS

If you are running Windows for Workgroups 3.11 with MSIPX, you may experience a five-second delay when you start applications from the Windows graphical user interface (GUI). This delay occurs only if you have 32-bit file access enabled on a hard disk drive controlled by the real mode mapper (RMM.D32). In this situation, Windows may also load more slowly. This delay does not occur when you start MS-DOS applications from an MS-DOS virtual machine (VM).

Real mode mapper controlled drives include drives that are incompatible with 32-bit disk access and drives that have been compressed with a disk- compression program, such as MS-DOS 6.2 DoubleSpace or STAC Electronics' Stacker. (MS-DOS 6.0 DoubleSpace is incompatible with 32-bit file access).

WORKAROUND

To work around this problem, do one of the following:

  • Upgrade MSIPX to Novell ODI drivers. This is recommended for Windows for Workgroups 3.11/Novell NetWare users. ODI should provide faster access to NetWare servers and improve Windows for Workgroups performance.


-or-

  • Disable 32-bit file access.

For more information, please query on the following words in the Microsoft Knowledge Base:

32-bit file access and ne2000 and odi



Additional query words: dblspace 3.11 hangs locks hesitates double- click start launch 3rdparty

Keywords: KB107372