Article ID: 106665
Article Last Modified on 11/17/2003
APPLIES TO
- Microsoft Windows Sound System 1.0
- Microsoft Windows Sound System 1.0a
- Microsoft Windows Sound System 2.0
This article was previously published under Q106665
SUMMARY
The following information is an example of the [SNDSYS.DRV] section of the SYSTEM.INI file for the Windows Sound System. The explanation describes which lines determine the DMA, Interrupt, and I/O address of the Windows Sound System card:
[SNDSYS.DRV]
DMABufferSize=32
EnableAutoAcquireOPL3=1
Msft Hardware=1
Msft Support=1
Auto Select=1
Midi Play=1
DMA 0=1
DMA 1=1
DMA 3=1
Default DMA=0
I/O 530=1
I/O 604=1
I/O E80=1
I/O F40=1
Default I/O=530
IRQ 7=1
IRQ 9=1
IRQ 10=1
IRQ 11=1
Default IRQ=7
OldMSDOSGameCompatibility=False
DMADAC=0
DMAADC=0
Interrupt=10
IOAddress=530
The DMADAC and the DMAADC lines determine the DMA that Windows Sound System uses. The Interrupt and IOAddress lines determine the interrupt and I/O address of the board.
Additional query words: 1.0 1.0a 2.0 direct memory access settings snd sys
Keywords: KB106665
