Microsoft KB Archive/105318

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 15:04, 18 July 2020 by 3155ffGd (talk | contribs) (importing KB archive)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

WD: How to Obtain a Word 6.x/7.0 Converter for Use with Word 2.x

Q105318



The information in this article applies to:


  • Microsoft Word for Windows, versions 7.0, 7.0a
  • Microsoft Word for Windows, versions 2.0, 2.0a, 2.0a-CD, 2.0b, 2.0c, 6.0, 6.0a, 6.0c
  • Microsoft Word for Windows NT, version 6.0
  • Microsoft Word for the Macintosh, versions 6.0, 6.0.1, 6.0.1a





SUMMARY

A converter is available that allows Microsoft Word 2.0 for Windows to read files created by Word 6.0 and 7.0 for Windows, Word 6.0 for Windows NT, and Word 6.0 for the Macintosh. Word 2.0 for Windows users who don't yet have immediate access to Word 6.0 or who want to convert Word 7.0 files can obtain this converter by ordering or downloading the Word 6.x-7.0 Converter Kit (for Word 2.0 for Windows users).

Alternatively, if a complete installation of Word 6.0 for Windows exists on the same computer as Word 2.0, an earlier version of the converter is immediately available for installation that allows Word 2.0 to open a Word 6.0 for Windows document. This earlier version of the converter cannot open a Word 6.0 for the Macintosh or Word 6.0 for Windows NT document.

A complete installation of Word 7.0 does not install a 16-bit converter for Word 2.0, and you must order or download the converter.

For information on obtaining and installing either version of the Word 6.0 converter, see the appropriate section below.

To Obtain the Word 6.x/7.0 for Windows, Windows NT, and Macintosh Converter

The following file is available for download from the Microsoft Download Center. Click the file name below to download the file:


Mswrd6.exe

For additional information about how to download Microsoft Support files, click the article number below to view the article in the Microsoft Knowledge Base:

Q119591 How to Obtain Microsoft Support Files from Online Services

Microsoft used the most current virus detection software available on the date of posting to scan this file for viruses. Once posted, the file is housed on secure servers that prevent any unauthorized changes to the file.



If you are unable to access the source listed above, you can have the Word 6.x/7.0 Converter Kit (for Word 2.0 for Windows users) mailed to you by calling Microsoft Product Support Services Monday through Friday, 6:00 A.M. to 6:00 P.M. Pacific time at (425) 462-9673. If you are outside the United States, contact the Microsoft subsidiary for your area. To locate your subsidiary, see the Microsoft World Wide Offices Web site at:

http://www.microsoft.com/worldwide/default.htm

NOTE: Because the Microsoft Web site is constantly updated, the site address may change without notice. If this occurs, link to the Microsoft home page at the following address:

http://www.microsoft.com/

To Set Up the Word 6.x/7.0 for Windows, Windows NT, and Macintosh Converter

  1. Start Microsoft Windows.
  2. If you ordered the Word 6.x/7.0 Converter Kit, insert the disk you received in the appropriate floppy disk drive.


If you downloaded Mswrd6.exe from an online service, run Mswrd6.exe to extract the files it contains and skip to step 3.

  1. Click the Start button, and then click Run.
  2. Type source:\setup and press ENTER. "Source" is either the letter of your floppy disk drive or the directory containing extracted contents of Mswrd6.exe.

Installing the Word 6.0 for Windows Converter as Supplied with Word 6.x

  1. Quit Microsoft Word 2.0 if it is running.
  2. Copy the file Msword6.cnv from the \Msapps\Textconv subdirectory in your Windows directory to the Word 2.0 for Windows program directory. If this file is not available, run Word 6.0 for Windows Setup again to install the converter and repeat step 2.
  3. Restart Word 2.0 and open a Word 6.0 for Windows document that has a .DOC file name extension. The converter should now be properly installed.

NOTE: Although the file type referenced during conversion of Word 7.0 files is Word 6.0, the converter, Msword6.cnv, is the correct converter to use.

If you have questions about installing or using either version of the converter, in the United States call Product Support Services at (206) 462- WORD (462-9673) between 6:00 A.M. and 6:00 P.M. Pacific time. Outside the United States, contact your local Microsoft subsidiary.



MORE INFORMATION

OLE 2.0 support is required for this converter to successfully read a Word 6.0 or 7.0 for Windows file. The converter therefore does not work correctly if copied to a computer on which only Word 2.0 is installed.

This converter does not run under Windows 3.0. This limitation exists because Word 6.0 for Windows use object linking and embedding (OLE) 2.0 for file storage, so several OLE 2.0 files are required for the converter to read Word 6.0 for Windows files. These OLE files are supplied with the converter but are not guaranteed to work under Windows 3.0.

Note also that those formatting features added in Word 6.0 or 7.0 for Windows that did not exist in Word 2.0 are not retained in conversion.

The version of Msword6.cnv that is installed with a complete installation of Word 6.0 is used automatically by Microsoft programs that share converters, including Microsoft Works for Windows and Publisher for Windows.

The 32-bit version of the converter, Mswrd632.cnv that is installed with a complete installation of Word 7.0 is used automatically by 32-bit Microsoft programs that share converters including Microsoft Works and Publisher for Windows 95.

This converter is not designed for use from within Word for Windows itself.

Versions of Msword6.cnv that can read only Word 6.0 for Windows files include:

   Supplied with           File date   File size   Version stamp
   -------------------------------------------------------------
   Word 6.0 for Windows    10-27-93    136704      93102000
   Word 6.0a for Windows   01-26-94    137216      94012410
   Word 6.0c for Windows   08-10-94    138240      94080100 

All newer releases can read Word 6.0 and 7.0 for Windows, Word 6.0 for Windows NT, and Word 6.0 for the Macintosh files.

Additional query words: MSWORD6 conversion convert converted converts converting transfer transfers transferred transferring translation translate translated translates translating part number p/n 059-150-345 where

Additional query words:

Keywords : kbfile kbinterop wordnt winword ntword macword word6 word7 word95
Issue type : kbinfo
Technology :


Last Reviewed: November 10, 2000
© 2001 Microsoft Corporation. All rights reserved. Terms of Use.