Article ID: 104773
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q104773
SYMPTOMS
If you install Windows NT 3.1 on a Reply Model 32 MCA computer with the onboard AT IDE controller shipped with the machine, the following STOP message appears:
This error will occur while attempting to load Windows NT to complete the GUI portion of Setup. Setup will also hang, without a stop screen, on the Reply PS/2 Models 50, 55, 60/80 and 70 using the same onboard AT IDE controller. With these models, Setup will hang while attempting to load Windows NT to complete the GUI portion of Setup at the blue screen containing the following:
Microsoft Windows NT ver.3.1 [x kb of memory]
where x represents the amount of memory on the system.
All of the systems mentioned above work correctly with ESDI or SCSI hard drive controllers.
The Reply Model 32 and Reply PS/2 Models 50, 55, 60/80 and 70 are all on the Windows NT Hardware Compatibility List (HCL). However, they were only tested with ESDI and SCSI controllers.
STATUS
Microsoft has confirmed this to be a problem in Windows NT and Windows NT Advanced Server version 3.1. This problem was corrected in the latest U.S. Service Pack for Windows NT and Windows NT Advanced Server version 3.1. For information on obtaining the Service Pack, query on the following word in the Microsoft Knowledge Base (without the spaces):
S E R V P A C K
The product included here is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.
Additional query words: prodnt trap 7b unaccessible boot device
Keywords: kbhardware kbsetup KB104773