Article ID: 104219
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q104219
XTree Gold version 2.5 by XTree Company may perform screen redraws very slowly while running in a window under Windows NT. In order to correct this problem, the configuration of XTree needs to be changed.
There are two ways to get to the XTree Configuration screen:
- While in XTree, press ALT+F10.
- At the Command Prompt, run XTG_CFG.EXE from the XTree directory (C:\XTGOLD is the default).
Once you are in the XTree Configuration screen follow these steps:
- Select menu item 1, Modify Configuration Items.
- On the next screen, select Next Page.
- You should now be on Page 2 in Configuration Items. In the Display section, change option 2, Display is "flicker free," to Yes. Use ENTER to toggle between Yes and No.
The "flicker free" setting in XTree is used to correct some display problems like snowy or flickering lines that occur with some display adapters. This setting will effect the speed at which the screen is redrawn.
NOTE: If you are running Windows NT version 3.5 and the display flicker free is set to Yes, the system can stop functioning. The only option is to power down.
XTree Gold is manufactured by the XTree Company, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.
Additional query words: prodnt
Keywords: kb3rdparty KB104219
