Microsoft KB Archive/103946

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 16:43, 20 July 2020 by X010 (talk | contribs) (Text replacement - ">" to ">")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Article ID: 103946

Article Last Modified on 10/30/2006



APPLIES TO

  • Microsoft Mail Remote 3.2



This article was previously published under Q103946

SUMMARY

Microsoft provides a replacement for the MSRMTUI.DLL that is included with version 3.2 of Microsoft Mail Remote for Windows.

For complete information about obtaining and installing the MSRMTUI.DLL file, see the following sections:

  • To download the updated file
  • To update your MSRMTUI.DLL file


MORE INFORMATION

This update contains MSRMTUI.DLL, a replacement for the MSRMTUI.DLL file that is included with version 3.2 of Microsoft Mail Remote for Windows. This replacement file provides additional enhancements to the original MSRMTUI.DLL file that resolve the following problems:

  • The address list becomes corrupted when it is updated twice in the same session of Mail Remote for Windows.
  • If the user forgets his or her password or if the password is changed while the remote driver is in use, the password cannot be reset.

    NOTE: To resolve this problem, two files must be updated: the MSRMTUI.DLL file (included in this update) and the ADMIN.EXE file provided in the Microsoft Mail for PC Networks version 3.2a Update. For details on this procedure please see the "To reset the password for a Mail Remote for Windows user" section below.
  • Invalid extended information may be displayed when you are obtaining details on a user from the Global Address List. The invalid information consists of default template fields associated with a postoffice other than the one on which the user's account resides. This condition can occur if customized user template *.TPL files are present on the remote user's workstation. Another possible symptom of this condition is receiving one of these messages when you are obtaining details on users from the GAL: "A GLB file on your server is corrupt" or "Address is no longer valid." The updated MSRMTUI.DLL file (included in this update) will prevent the customized user template *.TPL files from being copied to the remote user's workstation.

    NOTE: To remove the customized user template *.TPL files from an existing installation of Mail Remote for Windows, the user must first follow the "To replace your MSRMTUI.DLL file" procedure outlined below to install the updated MSRMTUI.DLL file, and then follow one of the procedures outlined in the "To update your address lists" section to obtain new address lists from the postoffice.
  • A message remaining in the Outbox could be misdirected if the remote address book was updated without uploading messages. The client will now check for the outbound messages prior to updating the address book. To ensure this fix works correctly, the following DLLs must be upgraded in conjunction with this DLL:

          MSRMT.DLL    version 3.2.4013
          MSRMTCN.DLL  version 3.2.4013
          MSRMTSU.DLL  version 3.2.4013
          MSRMTTR.DLL  version 3.2.4013
                            

To download the updated file

The following file is available for download from the Microsoft Download Center:

For additional information about how to download Microsoft Support files, click the following article number to view the article in the Microsoft Knowledge Base:

119591 How to Obtain Microsoft Support Files from Online Services


Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help to prevent any unauthorized changes to the file.

After you download MSRMTUI.EXE to a clean directory, run it (by typing msrmtui at the MS-DOS prompt) to extract the contents of the file. You should receive the following files:

MSRMTUI.DLL (165,136 bytes, dated 06-15-95, 6:36 P.M.)
README.TXT


To replace your MSRMTUI.DLL file

  1. At the MS-DOS command prompt, type the following and press ENTER

    copy <path>:\msrmtui.dll <destination>

    where <path> is the drive and directory where you ran the self- extracting MSRMTUI.EXE file and <destination> is the drive and directory where your MSRMTUI.DLL file currently resides. For example, if you ran the self-extracting file from the TEST directory on drive D, and your MSRMTUI.DLL file is located in the Windows SYSTEM subdirectory on drive C, type the following command:

    copy d:\test\msrmtui.dll c:\windows\system

To update your address lists

Perform one of these procedures if you want to remove the customized user template *.TPL files from an existing installation of Mail Remote for Windows:

  • Update the address lists by using a modem connection to the postoffice established through the Mail Remote user interface:


    1. From the View menu, choose Connect Now.
    2. Select the Update Address Lists option.
    3. Choose the OK button.
  • Update the address lists by using a LAN connection to the postoffice and the Mail System Selector:


    1. Obtain a network connection to the postoffice and edit the [Microsoft Mail] section of your MSMAIL.INI file to add a ServerPath= line with the actual location of the Mail data files.
    2. With the Microsoft Mail for PC Networks driver current, exit and sign out of Mail.
    3. Use the Microsoft Mail System Selector to switch from the Microsoft Mail for PC Networks driver to the Mail Remote driver. The Mail Remote dialog box appears.
    4. To copy the address lists from the postoffice to your remote computer, select the Copy Address List From Postoffice option.
    5. Choose the OK button.
  • Update the address lists by using a new data disk:


    1. Obtain a new data disk from the Mail Administrator.
    2. Copy the files from the new data disk to the <drive>:\<Windows_dir>\MSMAIL\MSRMT\USERINFO subdirectory.
    3. Launch Mail Remote for Windows to expand the address lists.

To reset the password for a Mail Remote for Windows user

To reset the password, you must ensure that the user's data disk was created using the version of ADMIN.EXE provided in the Microsoft Mail for PC Networks version 3.2a Update.

Have the user do the following:

  1. Connect to the network on which his or her postoffice resides.
  2. Use the Mail Selector to change to the PC Mail LAN driver.

You can then use ADMIN.EXE to reset the user's password. Once this is done, have the user do the following:

  1. Log in to Mail using the reset password.
  2. After successfully logging in, the user can change the password.
  3. Use the Mail Selector to switch back to the remote driver.



Additional query words: 3.20 wga

Keywords: kbdownload kbgraphxlinkcritical KB103946