Microsoft KB Archive/103091

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 09:25, 20 July 2020 by X010 (talk | contribs) (Text replacement - """ to """)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

PSS ID Number: 103091

Article Last Modified on 10/23/1999



The information in this article applies to:

  • Microsoft FoxBASE+ for MS-DOS 2.1



This article was previously published under Q103091

SYMPTOMS

FoxBASE+ ignores the CHR(0) character when sending output to a printer.

RESOLUTION

To work around this problem, send CHR(127) to the printer.

MORE INFORMATION

Steps to Reproduce Problem

  1. Run the following code:

          SET PRINT ON
          SET PRINT TO
          SET PRINT TO test.txt
          ?CHR(27)+"YES"+CHR(0)
          ?
          SET PRINT TO
          SET PRINT OFF
                            
  2. After the program has executed, you must quit FoxBASE+. At the MS-DOS prompt, issue the following command:

    DEBUG test.txt d

    The following line of hexadecimal characters will be displayed:

    0D 0A 1B 79 65 73 0D 01-8B C3 48 12 B1 04 50 50 1B hex=chr(27) 79 hex=Y 65 hex=E 73 hex=S

    NOTE: "00 hex" is not present after "73 hex".
  3. Press Q to quit Debug.

If the same code is executed in FoxPro versions 1.02 and later for MS-DOS, Debug will produce the following line of hexadecimal characters:

0D 0A 1B 79 65 73 00 0D-0A C3 48 12 B1 04 62 75

1B hex=chr(27)
79 hex=Y
65 hex=E
73 hex=S
00 hex=chr(0)


Keywords: KB103091
Technology: kbAudDeveloper kbFoxBASE210DOS kbFoxBASESearch kbFoxproSearch