Microsoft KB Archive/102970

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 08:25, 20 July 2020 by X010 (talk | contribs) (Text replacement - """ to """)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Knowledge Base


Article ID: 102970

Article Last Modified on 11/1/2006



APPLIES TO

  • Microsoft Windows NT Advanced Server 3.1
  • Microsoft Windows NT Workstation 3.1
  • Microsoft Windows NT Advanced Server 3.1



This article was previously published under Q102970

SUMMARY

The article contains REGISTRY entries for the SNMP dialog boxes. There are no subgroups.

SNMP SERVICE

The following values store the settings chosen in the SNMP dialog boxes when you configure SNMP. You should always use the Network icon in Control Panel to configure SNMP.

These entries are in the following Registry path:

   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Snmp\Parameters

Authtrap   REG_SZ   Booleon
---------------------------
Default:  On
                

Indicates whether the SNMP service sends a trap whenever it receives a request that does not match any community name or host filter in its lists. If this value is off (0), the SNMP service does not send a trap when this occurs.

CommunityNames   REG_SZ   Names
-------------------------------
Default:  public
                

Specifies one or more community names defining groups of hosts from which the SNMP service will accept requests.

TrapDestinations   REG_SZ   Names
---------------------------------
Default:  -
                

Specifies one or more host names or IP adddresses defining hosts to which the SNMP service sends traps.

TrapCommunity   REG_SZ   Names
------------------------------
Default:  Public
                

Specifies the name designating an Internet community of hosts to which the SNMP service sends traps.

REFERENCES

"The Windows NT Resource Kit for Operating System Version 3.1".


Additional query words: prodnt

Keywords: kbinfo kbother KB102970