Article ID: 102968
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q102968
SUMMARY
SYSTEM COMPONENTS WITH NO ADDITIONAL ENTRIES
The following system components do not write entries in the Registry, besides the basic information shown in CurrentControlSet\Services:
Abiosdsk NetDDE
Beep Null
ClipSrv Printing (all keys)
Cpqarray Schedule service
Dellarry SCSI class drivers
Delldsa Simbad
Diskperf Videoprt
File system drivers Windbg
Floppy driver
MUP utility
HOW WINDOWS NT MAPS LAN MANAGER PARAMETERS
This section lists LAN Manager network service parameters and their Windows NT equivalents. LAN Manager parameters that relate to MS- DOS are not listed. Also, because Windows NT dynamically allocates memory for network operations, many LAN Manager parameters are no longer relevant.
LAN Manager vs. Windows NT Settings for Services
In LAN Manager, service parameter settings are found in the file LANMAN.INI. In Windows NT, these settings are stored in the Registry.
In Windows NT, these entries are in the Registry in HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\Service name\Parameters.
Alerter Service
Parameters in Values in CurrentControlSet\Services
LANMAN.INI [alerter] \LanmanServer\Parameters
sizalertbuf
Messenger Service
Parameters in Values in CurrentControlSet\Services
LANMAN.INI [messenger] \LanmanServer\Parameters
logfile Messages are not stored
sizmessbuf Set by operating system
Netlogon Service
Parameters in Values in CurrentControlSet\Services
LANMAN.INI [Netlogon] \Netlogon\Parameters
pulse PulseInterval
randomize Randomize
scripts Use Server Manager or Services in Control Panel
update Update
Remote Access Service
Parameters in Values in CurrentControlSet\Services
LANMAN.INI [RemoteAccess] \RemoteAccess\Parameters
audit EnableAudit
authenticateretries AuthenticateRetries
authenticatetime AuthenticateTime
Parameters in Values in CurrentControlSet
LANMAN.INI [RemoteAccess] \Services\RemoteAccess
\Parameters\NetbiosGateway\Parameters
autodisconnect Autodisconnect
enablebroadcast EnableBroadcast
maxdynmem MaxDynMem
maxnames MaxNames
maxsessions MaxSessions
multicastforwardrate MulticastForwardrate
numworkbufs -
raslannets -
remotelisten RemoteListen
sizworkbufs SizWorkbufs
Replicator Service
Parameters in Values in CurrentControlSet
LANMAN.INI [Replicator] \Services\Replicator\Parameters
exportpath Use Server Manager to set export path
exportlist Use Server Manager to enter
To List names
guardtime Guardtime
importpath Use Server Manager to set import path
importlist Use Server Manager to enter
To List names
interval Interval
logon -
password -
pulse Pulse
random Random
replicate User Server Manager to set in Windows NT
Server Service
Parameters in Values in
LANMAN.INI [server] CurrentControlSet\Services
\LanmanServer\Parameters
accessalert -
alertnames Use Server Manager to list users to receive alert
messages (also corresponds to Alertnames parameter
in Alerter section of the registry)
alertsched Alertsched
auditing Use User Manager for Domains to set audit policy
autodisconnect Disc
autopath -
autoprofile -
diskalert DiskspaceThreshold
erroralert ErrorThreshold
guestacct Use User Manager to enable guest account
logonalert -
maxauditlog Set using Event Viewer (also corresponds to
MaxSize entry in Eventlog section of registry)
maxchdevjob -
maxnetbios -
maxsessopens SessOpens
maxsessreqs MaxMpxCt
netioalert NetworkErrorThreshold
noauditing Set using User Manager
numadmin -
numfiletasks -
security No share security
sizreqbuf SizReqBuf
srvanndelta AnnDelta
srvannounce Announce
srvcomment Comment
srvhidden Hidden
userpath -
Server heuristics Values in
in LAN Manager CurrentControlSet\Services \LanmanServer\Parameters
5 EnableFCOpens
6 ThreadPriority
10 ScavTimeout
11 EnableSoftCompat
15 OplockBreakWait
Autotuned server Values in
parameters CurrentControlSet\Services\LanmanServer\Parameters
maxshares -
maxusers -
numbigbuf -
numreqbuf -
SNMP Service
Parameters in Values in
LANMAN.INI [snmp] CurrentControlSet\Services \Snmp\Parameters
authtrap Authtrap
communitynames Communitynames
hostmasks No hostmasks
trapdestinations Trapdestinations
trapcommunity Trapcommunity
version -
UPS Service
Parameters in Values in
LANMAN.INI[ups] CurrentControlSet\Services\UPS (servers only)
batterytime BatteryLife
cmdfile Command File
messdelay FirstMessageDelay
messtime MessageInterval
recharge RechargeRate
signals Options
Workstation Service
Parameters in Values in
LANMAN.INI[workstation] CurrentControlSet\Services
\LanmanWorkstation\Parameters
charcount MaxCollectionCount
chartime CollectionTime
charwait CharWait
computername, Must be set through Network domain, othdomains
option in Control Panel
keepconn KeepConn
keepsearch This is hard coded to 5 minutes in Windows NT
maxcmds Windows NT does not limit number of commands except as
specified by the server
maxerrorlog Error logs sizes set in Event Viewer
maxthreads MaxCmds
maxwrkcache Set by Windows NT cache manager
numalerts Not applicable in Windows NT
numbcharbuf Windows NT allocates buffers as needed.
numdgrambuf MailslotBuffers
numservices No limit to number of services in Windows NT.
numworkbuf No limit to number of work buffers in Windows NT
sesstimeout SessTimeout
sizcharbuf SizCharBuf
sizerror Self-configuring in Windows NT
sizworkbuf No limit to the size of workstation buffers in
Windows NT except as specified by server.
wrkservices Use Services option in Control Panel to set for
Windows NT
LAN Manager Workstation Values in CurrentControlSet\Services
heuristics \LanmanWorkstation\Parameters
0 UseOpportunisticLocking
5 UseLockReadUnlock
11 UseRawRead and UseRawWrite
19 Use512ByteMaxTransfer
NetBEUI Protocol
Parameters in Values in
LANMAN.INI[netbeui] CurrentControlSet\Services\nbf\Parameters
msdlcretries LLCRetries
ncbs -
netbiosretries GeneralRetries
AddNameQueryRetries
NameQueryRetries
netbiostimeout GeneralTimeout
AddNameQueryTimeout
NameQueryTimeout
t1 DefaultT1Timeout
t2 DefaultT2Timeout
ti DefaultTiTimeout
TCP/IP
Parameters in Values in
LANMAN.INI[tcpip] CurrentControlSet\Services
\adapter_name#\Parameters\Tcpip
ipaddress0 IpAddress0
subnetmask0 Subnetmask0
Parameters in Values in
LANMAN.INI[tcpip] CurrentControlSet\Services\TCPIP\Parameters
defaultgateway0 DefaultGateway
LAN Manager vs. Windows NT Settings for Adapter Cards
In LAN Manager, these entries are found in the [adaptercard] section of the
PROTOCOL.INI file.
In Windows NT, these entries are in the registry in HKEY_LOCAL_MACHINE
\SYSTEM\CurrentControlSet\Services\adapter name#\Parameters. However, you
can change most of settings for network adapter cards by using the Network
option in Control Panel.
3Com Etherlink II
Parameters in Values in
LANMAN.INI[adapterCard] CurrentControlSet\Services
\adapter name#\Parameters
drivername Drivername
interrupt IRQ
ioaddress IoBaseAddress
maxtransmits -
netaddress NetworkAddress
transceiver Transceiver
xmitbufs -
3Com EtherLink 16
Parameters in Values in
LANMAN.INI[adapterCard] CurrentControlSet\Services
\adapter name#\Parameters
drivername DriverName
iobase IoBaseAddress
netaddress NetworkAddress
Compaq 32-Bit DualSpeed Token Ring
Parameters in Values in
LANMAN.INI[adapterCard] CurrentControlSet\Services
\adapter name#\Parameters
drivername Drivername
earlyrelease Earlyrelease
maxframesize MaxFramesize
maxreceives -
maxrequests MaxInternalReqs
maxtransmits -
netaddress NetworkAddress
product_id ProductId
DEC DEPCA
Parameters in Values in
LANMAN.INI[adapterCard] CurrentControlSet\Services
\adapter name#\Parameters
drivername DriverName
maxmulticast MaxMulticstList
maxtransmits -
IBM Token-Ring Adapters
Parameters in Values in
LANMAN.INI[adapterCard] CurrentControlSet\Services
\adapter name#\Parameters
drivername DriverName
earlyrelease Earlyrelease
maxtransmits -
netaddress NetworkAddress
primary or alternate IObaseAddress
product_id -
ram (Adapter and -
Adapter II only)
recvbufs -
recvbufsize -
xmitbufs -
xmitbufsize -
Intel EtherExpress 16
Parameters in Values in
LANMAN.INI[adapterCard] CurrentControlSet\Services
\adapter name#\Parameters
drivername Drivername
ioaddress IobaseAddress
Novell NE2000
Parameters in Values in
LANMAN.INI[adapterCard] CurrentControlSet\Services
\adapter name#\Parameters
drivername Drivername
interrupt IRQ
iobase IoBaseAddress
REFERENCES
"The Windows NT Resource Kit for Operating System Version 3.1".
Additional query words: prodnt
Keywords: kbinfo kbother KB102968
