Microsoft KB Archive/102814

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 18:13, 12 August 2020 by X010 (talk | contribs) (X010 moved page Microsoft KB Archive/Q102814 to Microsoft KB Archive/102814 without leaving a redirect: Text replacement - "Microsoft KB Archive/Q" to "Microsoft KB Archive/")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

SETUP /E with Stacker 3.1 on Boot Drive Err Msg Requests Disk PSS ID Number: Q102814 Article last modified on 11-01-1993 PSS database name: O_MSDOS



The information in this article applies to:
- Microsoft MS-DOS operating system version 6.0


If you run SETUP /E on a system that has Stacker 3.1 on the boot drive, the following error message is displayed

Insert disk labeled <x> in drive C and press enter to continue

where <x> is an ASCII character.

If you press ENTER, all files on the hard disk are deleted. Pressing F3 allows you to exit safely. This problem does not occur if Stacker 3.1 is installed on the extended partition.


To work around this problem, use the MS-DOS Expand utility (EXPAND.EXE) to expand the MS-DOS utilities from the disk. Then, manually set up the MSTOOLS group and icons in Microsoft Windows.

If this does not work, you must either remove Stacker 3.1 and then either compress a non-boot drive, or run SETUP /E and reinstall Stacker 3.1 after the utilities are on the boot drive.

Additional reference words: 6.00

Copyright Microsoft Corporation 1993.