Article ID: 102795
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q102795
SYMPTOMS
With Windows NT, multiple network adapters in one machine must be on different networks (either physically separate networks or different logical networks with different transport protocols). Otherwise, you will receive the following error message:
CAUSE
The duplicate name exists on the network error occurs because each adapter will attempt to register itself on the network using a NetBIOS name. When the adapters try to register their NetBIOS names on the network, only the first adapter that attempts to register its NetBIOS name will succeed. The second adapter's attempt to register its name will generate the error message above and fail to register.
Windows NT does not check for these potential conflicts when a second network adapter is installed. Windows NT simply binds all installed protocols to the second adapter, regardless of whether they were bound to the first network adapter.
RESOLUTION
To work around this error, either manually disable the bindings or remove the conflicting protocol from the second network adapter. This can be done using the Network option in Control Panel
Keywords: kbnetwork KB102795