Microsoft KB Archive/102728

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 15:02, 18 July 2020 by 3155ffGd (talk | contribs) (importing KB archive)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Knowledge Base


Manual Installation of the UAM

Article ID: 102728

Article Last Modified on 10/31/2006



APPLIES TO

  • Microsoft Windows NT Advanced Server 3.1
  • Microsoft Windows NT Server 3.51
  • Microsoft Windows NT Server 4.0 Standard Edition



This article was previously published under Q102728

Customers that have installed the Services for Macintosh and have not yet upgraded their partitions to NTFS will not have the Microsoft User Authentication Module (UAM) volume. This article explains how to set up that volume after a NTFS partition has been created.

The Microsoft UAM volume is formed with the following files:

  • MS UAM
  • ReadMe.UAM

To create this volume and put the correct files in it, do the following:

  1. Make sure that you have an NTFS partition.
  2. If you are running Windows NT 3.x, run the following command from a command prompt:

    SETUP /i OEMNXPSM.INF /c UAMINSTALL

    If you are running Windows NT 4.0, run the following command from a command prompt:

    SETUP /i OEMNSVSM.INF /c UAMINSTALL

    The OEMNXPSM.INF and OEMNSVSM.INF files are the script information files for the Services for Macintosh, and UAMINSTALL is the name of the section that has the necessary commands to modify the registry in order to add that volume.
  3. The Windows NT Setup screen appears and returns to the command prompt if the above step was successful.

    There are two things happening at this point. One is the creation of the volume itself, and the other is the copying and creation of the files. The SMFUAM.IFO and the SMFUAM.RSC are the two forks for the MS UAM file, and the SFMUAM.TXT is the ReadMe.UAM file. These files get stored within a subdirectory called AppleShare Folder, which is also created by this script file.
  4. Because the script file modifies the registry, you will not see the volume if you have the File Services for Macintosh started. If this is the case, stop and start the File Services for Macintosh.
  5. Check the newly created volume in File Manager, Server Manager or the MacFile icon in the Control Panel.



Additional query words: sfm prodnt Authentication

Keywords: kbinterop KB102728