Microsoft KB Archive/102714

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 15:02, 18 July 2020 by 3155ffGd (talk | contribs) (importing KB archive)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Knowledge Base


Data Corruption with Quantum LPS240 IDE Controller

Article ID: 102714

Article Last Modified on 11/1/2006



APPLIES TO

  • Microsoft Windows NT Advanced Server 3.1
  • Microsoft Windows NT Workstation 3.1
  • Microsoft Windows NT Advanced Server 3.1



This article was previously published under Q102714

SUMMARY

WARNING: Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the use of Registry Editor can be solved. Use this tool at your own risk.

Older firmware versions in the Quantum LPS240 IDE controller can corrupt data or return incorrect data even though the data on the drive is correct. To determine the kind of disk you are using, run Registry Editor (REGEDT32.EXE) and look at the following:

   HKEY_LOCAL_MACHINE\hardware\devicemap\atdisk
                

Under each controller listed, there should be a key for each disk controlled. Under the disk key, the value entry form identifier generally has a string with the make of the drive. The firmware value entry should have the firmware revision for that drive.

Quantum LPS240 should have a firmware revision of 6.x or later. Earlier versions of this drive may need to be returned to the manufacturer since the 6.0 firmware requires a PCB swap on the drive.


Additional query words: prodnt

Keywords: kbhardware KB102714