Article ID: 102535
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q102535
SUMMARY
When using the Sound Blaster 1.x driver provided with Windows NT to run with the Sound Blaster Pro, the DMA channel must be set to 1.
The Sound Blaster 1.x driver has two settings for DMA: Off and DMA channel 1. The Sound Blaster Pro has three settings: DMA channels 0, 1, and 3.
DMA channel 1 must be used because it is the only setting in common between the adapter and the driver.
Additional query words: prodnt
Keywords: kbhardware KB102535