Article ID: 102039
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q102039
SYMPTOMS
You are using a 16-bit Future Domain SCSI adapter and Windows NT Setup stops responding (hangs) when the graphical portion of Setup starts.
CAUSE
Under MS-DOS you can configure the 16-bit Future Domain SCSI adapters so they do not use an interrupt for the adapter. This configuration is not supported by Windows NT.
RESOLUTION
Configure the 16-bit Future Domain SCSI on an interrupt. This can be changed using a jumper setting on the adapter card.
To contact Future Domain, please call (408) 934-7274.
The Future Domain SCSI products included here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
Additional query words: prodnt fail fails 1660 board
Keywords: kbhardware KB102039
