Microsoft KB Archive/102039

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 16:02, 18 July 2020 by 3155ffGd (talk | contribs) (importing KB archive)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Knowledge Base


Setup May Fail on Future Domain SCSI Controller

Article ID: 102039

Article Last Modified on 11/1/2006



APPLIES TO

  • Microsoft Windows NT Advanced Server 3.1
  • Microsoft Windows NT Workstation 3.1
  • Microsoft Windows NT Advanced Server 3.1



This article was previously published under Q102039

SYMPTOMS

You are using a 16-bit Future Domain SCSI adapter and Windows NT Setup stops responding (hangs) when the graphical portion of Setup starts.

CAUSE

Under MS-DOS you can configure the 16-bit Future Domain SCSI adapters so they do not use an interrupt for the adapter. This configuration is not supported by Windows NT.

RESOLUTION

Configure the 16-bit Future Domain SCSI on an interrupt. This can be changed using a jumper setting on the adapter card.

To contact Future Domain, please call (408) 934-7274.

The Future Domain SCSI products included here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.


Additional query words: prodnt fail fails 1660 board

Keywords: kbhardware KB102039