Knowledge Base

PC DB: Assigning Owners to Files in NetWare 2.x and 3.x

Article ID: 100511

Article Last Modified on 10/30/2006

APPLIES TO

This article was previously published under Q100511

SUMMARY

To assign an owner to ownerless files in Novell NetWare 2.x and 3.x using the NetWare Filer utility (FILER.EXE), do the following:

Log in to the network as Supervisor.
At the Mail database directory, change to the subdirectory where the suspected ownerless file resides.
Run the Filer utility by typing the following and pressing ENTER:

filer
From the Available Topics menu, select Directory Contents, then press ENTER. A listing of the files in the subdirectory will be displayed.
To assign an owner to a single file:
1. Use the arrow keys to move the insertion point to the suspected file and press ENTER.
2. From the File Options menu, select View/Set File Information and press ENTER.
3. From the File Information For <filename> menu, select the Owner field and press ENTER.
  
  A list of valid NetWare user names will be displayed.
4. Highlight the Supervisor name and press ENTER. Microsoft recommends assigning Supervisor as the owner because this user name will never be deleted from the bindery, thus eliminating the chance of the file becoming ownerless in the future.
To assign an owner to multiple files:
1. From the Directory Contents menu, use the UP ARROW and DOWN ARROW keys to select each suspected file and press the F5 key at each file to select the file. When you have selected each file, press ENTER.
2. From the Multiple File Operations menu, select Set Owner and press ENTER.
3. At the New File Owner prompt, use the BACKSPACE key to clear the previous name, then type the name "Supervisor."

Additional query words: 2.10 3.00 3.20

Keywords: KB100511