Microsoft KB Archive/100008

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 15:01, 18 July 2020 by 3155ffGd (talk | contribs) (importing KB archive)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Knowledge Base


Assigning a Drive Letter to a CD-ROM Drive

Article ID: 100008

Article Last Modified on 11/1/2006



APPLIES TO

  • Microsoft Windows NT Advanced Server 3.1
  • Microsoft Windows NT Workstation 3.1



This article was previously published under Q100008

SUMMARY

When a CD-ROM drive is initialized under Windows NT, it uses the first available drive letter. There is no straightforward method of choosing a drive letter. However, you can set up your other drives and partitions in Disk Administrator such that the drive letter you want to use for your CD-ROM is unused. For example, if you have two partitions and you want your CD-ROM to be drive D, use Disk Administrator to set the partition drive letters to C and E. When the CD-ROM initializes, it will use D because it is the first available drive letter.

NOTE: This workaround does not let you choose a drive letter that is used for a network drive. The next available drive letter used by a local physical drive will be used by the CD-ROM. There is no workaround.

NOTE: You can also use the SUBST command to assign a different drive letter to the CD-ROM drive.

Microsoft has confirmed this to be a problem in Windows NT version 3.1. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.


Additional query words: prodnt winnt sticky static

Keywords: kbhardware KB100008