Article ID: 58771
Article Last Modified on 2/26/2007
APPLIES TO
- Microsoft Mail for AppleTalk Networks 2.0
- Microsoft Mail for AppleTalk Networks 2.0a
- Microsoft Mail for AppleTalk Networks 2.0b
- Microsoft Mail for Appletalk Networks 3.0
This article was previously published under Q58771
SUMMARY
IMPORTANT: All Microsoft Mail version 2.00 customers who have gateways installed should be using the "MS Mail GW" file version 2.00b and the "Microsoft Mail Server" file version 2.00b, both of which are located in the System Folder of the Mail server. An updated "MS Mail GW" file is available through Microsoft End User Sales and Service at (800) 426-9400 or Microsoft International Customer Service at (206) 936-8661, but ONLY for customers using the AppleLink Gateway to Microsoft Mail. Customers using other gateways must obtain an updated "MS Mail GW" file from the developer of the gateway they are using. The Microsoft Mail server upgrade can also be obtained at the above numbers. Below are the steps in using the Gateway Installer program to install a generic gateway for Microsoft Mail. Since these are the steps for installing a generic gateway, the steps for installing a real gateway (for example, the AppleLink gateway) will vary.
MORE INFORMATION
The gateway must be installed on a Microsoft Mail server that is up and running. This Mail server is known as the gateway server.
- Copy the gateway files to the server's hard disk. Also copy the file "MS Mail GW" to the System Folder of the gateway server.
- From the Apple menu, choose the Chooser and click the icon for Microsoft Mail.
- Click the name of the mail server on which you are installing the gateway. Close the Chooser.
- Start the Gateway Installer program. The name of the mail server selected in Step 3 should be displayed.
- From the Gateway menu, choose Install Gateway.
- In the Open dialog box, select the gateway resource file to install. Click the Install button.
- When done, choose Quit from the File menu.
- Connect any communications hardware required by the gateway, for example, a modem or serial cable, to the modem port. Gateways may even use AppleTalk for communications.
- Restart the gateway server Macintosh.
- From the Apple menu, choose the Chooser and click the icon representing the file "MS Mail GW".
- Click the name of the gateway server, the same server as in step 4 above. Close the Chooser.
- The Network Manager should set up gateway accounts if needed and do gateway configuration if needed.
At this point, the generic gateway installed with the above steps should be ready to send and receive mail.
Additional query words: 2.00 2.00a 2.00b 3.00
Keywords: KB58771
