Article ID: 248634
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Server 4.0 Standard Edition
This article was previously published under Q248634
SYMPTOMS
When you are using a multihomed Microsoft Windows NT Server 4.0-based computer as a router between subnets on a local area network (LAN) that is divided into multiple physical subnets, routing by using the NWLink Internetwork Packet Exchange/Sequenced Packet Exchange (IPX/SPX) compatible protocol on your network may not succeed.
However, Transmission Control Protocol/Internet Protocol (TCP/IP) routing works correctly.
CAUSE
This behavior can occur when each physical subnet does not have a unique external network number.
RESOLUTION
To resolve this issue, assign a unique external network number to each network adapter on the multihomed Windows NT Server 4.0 router. (The NWLink protocol uses these external network numbers to identify unique network segments.) On each computer in the subnet, configure NWLink to use the correct external number for its subnet.
Keywords: kbprb KB248634
