Microsoft KB Archive/170771

From BetaArchive Wiki
Knowledge Base


Cluster may fail if IP address used from DHCP server

Article ID: 170771

Article Last Modified on 2/26/2007



APPLIES TO

  • Microsoft Windows Server 2003, Datacenter Edition (32-bit x86)
  • Microsoft Windows Server 2003, Enterprise Edition (32-bit x86)
  • Microsoft Windows 2000 Advanced Server
  • Microsoft Windows NT Server 4.0 Enterprise Edition
  • Microsoft Cluster Server 1.1



This article was previously published under Q170771

SYMPTOMS

If a server runs Microsoft Cluster Server and the installed network adapters obtain IP addresses from a DHCP server, the ability to access the cluster may be compromised.

CAUSE

Microsoft Cluster Server expects the primary address on configured network cards to remain available. If a leased address expires and cannot be renewed, network connectivity may be lost. As a result, failures may occur within the cluster.

RESOLUTION

To prevent IP address failure and other problems, use a static IP address for network adapters installed in cluster nodes. Static addresses will ensure availability of critical IP addresses and will further ensure high availability of important resources.


Additional query words: MSCS server cluster

Keywords: kbinfo kbsetup KB170771