Registrations are now open. Join us today!
There is still a lot of work to do on the wiki yet! More information about editing can be found here.
Already have an account?

Microsoft KB Archive/170395

From BetaArchive Wiki
Knowledge Base


MTG: MTA Fails with Error Code 914:ce on NetWare 4.11

Article ID: 170395

Article Last Modified on 10/30/2006



APPLIES TO

  • Microsoft Mail for PC Networks 3.5



This article was previously published under Q170395

SYMPTOMS

Using MS-DOS MTA and Dispatch with Dynadmin results in a failure to connect to a Netware 4.11 server. The following sample is from External.log:

03-31-97 13:27 Dynamically connecting T: to FNIO-XDV-
TAFT\EMAIL:COURIER.DAT.
03-31-97 13:27 An unknown error code (914:ec) was returned.
03-31-97 13:27 Reading master file. Could not connect to drive.

CAUSE

The NLSP that ships with NetWare version 4.11 causes Dynadmin to fail. The Novell utility, NLSP, provides a link state approach to routing and is automatically enabled during a NetWare 4.11 installation. This link state routing protocol provides backwards compatibility and, in theory, should operate successfully in a mixed NLSP and RIP routing environment. Novell Technical Support has been made aware of this issue.

WORKAROUND

Disable the default NLSP routing on NetWare 4.11 file servers. This is accomplished through editing the Autoexec.ncf file and running UNLOAD IPXRTR at the file server console or by selecting RIP in the INETCFG utility. The server must then be restarted.

Keywords: kbprb KB170395