Registrations are now open. Join us today!
There is still a lot of work to do on the wiki yet! More information about editing can be found here.
Already have an account?

Microsoft KB Archive/106665

From BetaArchive Wiki
Knowledge Base


Example SYSTEM.INI Configuration Lines for Sound System

Article ID: 106665

Article Last Modified on 11/17/2003



APPLIES TO

  • Microsoft Windows Sound System 1.0
  • Microsoft Windows Sound System 1.0a
  • Microsoft Windows Sound System 2.0



This article was previously published under Q106665

SUMMARY

The following information is an example of the [SNDSYS.DRV] section of the SYSTEM.INI file for the Windows Sound System. The explanation describes which lines determine the DMA, Interrupt, and I/O address of the Windows Sound System card:

   [SNDSYS.DRV]
   DMABufferSize=32
   EnableAutoAcquireOPL3=1
   Msft Hardware=1
   Msft Support=1
   Auto Select=1
   Midi Play=1
   DMA 0=1
   DMA 1=1
   DMA 3=1
   Default DMA=0
   I/O 530=1
   I/O 604=1
   I/O E80=1
   I/O F40=1
   Default I/O=530
   IRQ 7=1
   IRQ 9=1
   IRQ 10=1
   IRQ 11=1
   Default IRQ=7
   OldMSDOSGameCompatibility=False
   DMADAC=0
   DMAADC=0
   Interrupt=10
   IOAddress=530
                

The DMADAC and the DMAADC lines determine the DMA that Windows Sound System uses. The Interrupt and IOAddress lines determine the interrupt and I/O address of the board.


Additional query words: 1.0 1.0a 2.0 direct memory access settings snd sys

Keywords: KB106665