Registrations are now open. Join us today!
There is still a lot of work to do on the wiki yet! More information about editing can be found here.
Already have an account?

Microsoft KB Archive/105232

From BetaArchive Wiki
Knowledge Base


Using RAS 1.1a Client with Workgroup Connection for MS-DOS

Article ID: 105232

Article Last Modified on 10/31/2006



APPLIES TO

  • Microsoft Windows NT Advanced Server 3.1
  • Microsoft Windows NT Workstation 3.1
  • Microsoft Windows NT Advanced Server 3.1
  • Microsoft Windows NT Server 4.0 Standard Edition
  • Microsoft Windows NT Workstation 4.0 Developer Edition



This article was previously published under Q105232

To use Remote Access Service (RAS) 1.1a Client software with Windows 3.1 to connect to a Windows NT RAS Server, you must first install Microsoft Network Client software. One option is to install Workgroup Connections for MS-DOS and allow the stand-alone Windows 3.1 computer to then be able to install and use the RAS 1.1a Client software.

Use the following procedure to install RAS 1.1a Client software on a standalone Windows 3.1 machine with Workgroup Connections:

  1. Outside of Windows 3.1, install Workgroup Connections for MS-DOS by typing in A:\setup.
  2. Select No Network Adapter during the installation. (It may also be advisable to not install the Mail files to save on hard disk space).
  3. After the installation is complete, restart the computer for the changes to take effect.
  4. Place the RAS Client Setup disk in drive A, start Windows 3.1, and from the Program Manager window, choose Run from the File menu, type the following in the Command Line field and then choose OK:


A:\SETUP

  1. After the installation is complete, create an icon for the RAS 1.1a Client software that executes the RASPHONE.EXE file.
  2. Quit Windows 3.1, switch to the Windows directory, and run SETUP.EXE to enter MS-DOS mode maintenance setup for Windows.
  3. Select the Network setting and change it from No Network Installed to Microsoft Network (or 100% Compatible).
  4. After quitting Setup, restart the computer and restart Windows 3.1 and the RAS 1.1a Client software should be installed properly.



Additional query words: prodnt WC

Keywords: kbnetwork KB105232